-
Anonymous users2024-01-23Determine the height, elastic the horizontal line around it, install the side keel, punch the hole, install the boom sling, install the light steel keel, install the stacked side panels, install the gypsum board, and complete the construction.
-
Anonymous users2024-01-22Anyway, practice makes perfect, and the best practice is to learn from the master, starting with the most basic layout or advanced point from the art of decoration.
-
Anonymous users2024-01-21As long as you are interested in the decoration industry, it is best to learn the fastest with a master as an apprentice.
-
Anonymous users2024-01-20Learn the principle of electrician, be familiar with the circuit diagram, give a lot of things, not to mention the installation of chandeliers, all kinds of lamps can be installed and repaired. Study hard!
-
Anonymous users2024-01-19No. 1: Design what the styling crane looks like. Section 2:
Measure the size (how wide and how long the hanging) is written down on paper or mobile phone, etc. No. 3: Go to the building materials market to buy wood, tell the people who buy building materials can help you budget how much wood dry wall nails to use, etc.
Step 4: Prepare tools such as air pumps, air guns, etc. Article 5:
After the above is ready, you can start construction, first make the keel in the gypsum board on the keel, and then scrape the putty in the spray latex paint.
-
Anonymous users2024-01-18The key to learning well depends on yourself, and it is best to go to a professional place to sign up for study and compare the system.
-
Anonymous users2024-01-17The first one, of course, is to study interior decoration at a vocational school.
The first type, and most people, are apprentices who learn from their masters, and after a certain amount of time, they will learn.
-
Anonymous users2024-01-16Learn from the carpenter! It's not hard to learn!
-
Anonymous users2024-01-15It's easy to learn, I don't think it's difficult.
-
Anonymous users2024-01-14Determine the degree of the Gaoling mill cover around the bomb.
Horizon. Installation.
Edge keel. Punch hole mounting.
Boom. Sling.
Installation. Light steel You's keel.
Installing the stacked side panels is installed.
drywall. Completion. Ruler noisy.
The construction process of the ceiling, no matter what the top is the same, (1) find out the top level, pop out the required horizontal line and top fixed line according to the requirements, and drill the hole. (2) According to the ceiling construction drawings, all the keel frame, first the inner layer, then the outer layer, installation and fixed leveling. (3) On the board, in some cases, the inner layer of the board is installed after the outer keel frame, and the board is checked after it is correct.
1. First determine the length of the light strip to be installed, and then cut the appropriate light strip length. Note that integer truncation is required. Because only by cutting it off from the cut will it not affect the circuit. If it is cut at will, it will cause a unit to not light up. >>>More
Almost all need to use the ceiling in the decoration, the ceiling is also a very good way to increase the sense of space decoration, even if it is a large house such as a villa, it is also necessary to carry out the ceiling, the ceiling is very important for the decoration of the villa. >>>More
Decoration pollution can't be said to be furniture at most. If you choose furniture with quality assurance and in line with national environmental protection standards, it will not cause decoration pollution. Therefore, to prevent decoration pollution, it is also necessary to pay attention to whether the glue and coating meet the national environmental protection standards, and whether other products meet the formaldehyde emission standards.
First carry out the ceiling, paint the walls, install water and electricity, and then install the home, sofas and appliances are on the back.