-
Anonymous users2024-01-23What kind of stagnant water, if it is water in the tank, then it is easy to do, open the lid of the toilet, the blue shell on the left that can float moves downward, so that the floating does not need a lot of water, you can adjust it, change it to a cheap 100 yuan or so, labor costs range from 100-500, look at the place, buy a life guide newspaper and call to ask.
-
Anonymous users2024-01-22That is, the structure of the pipe should be suitable for squatting Now it has been changed to sitting on the toilet Now sitting on the toilet and changing the squatting toilet First smash the toilet Put the chisel below and put it in the squatting toilet Cost I don't know what your sitting is installed with Is it cement or glass glue In fact, it is simple to remove the toilet Glass glue can be used to cut off the glue to go to the toilet The cement stain will be smashed Roughly calculate that there is no 300 yuan that cannot be taken down! The answer is satisfactory, please adopt the answer Thank you! If you are not satisfied, ask again!
-
Anonymous users2024-01-21Cost = master's construction fee + squatting urinal + cement and sand + waterproof paint + ceramic tile (choose according to the situation).
Depending on the region, the master's construction fee and materials will not be fixed, depending on the situation.
That is, the structure of the pipeline should be suitable for squatting, and now it is changed to sitting, now sitting, and changing to squatting, first smash off the sitting, and put the following chisel into the squatting stool, the cost, I don't know what your sitting is installed with, is cement or glass glue, in fact, it is simple to remove the toilet, the glass glue is loaded, and you can go to the toilet by cutting off the glue, and the cement stained will be smashed off.
There is a certain degree of difficulty, if it is replaced with a trap, like the one on the left, the first thing to consider is the connection of the pipe and the interface between the pipe and the toilet, as well as the sealing of the floor, if it is not handled well, it may leak and affect the lives of the residents downstairs. Secondly, there is a possibility of a blowout when the pipe is disconnected, because you can't live on the top floor, and even if it doesn't blow out, it is still possible to flow outward sewage. In addition, the diameter of the drain pipe of the toilet is relatively large, as shown in your diagram, there is not enough space for the replacement water trap.
Squat toilet, that is, squatting toilet, it has the characteristics of simple structure, hygienic use, easy production, easy installation, water saving and energy saving. Therefore, it is still on a par with the competition of toilets. Everyone should be familiar with the squat toilet, but what should you do when the squat toilet is clogged? >>>More
1. According to the sewage outlet of the installed product, reserve the sewer pipe at the appropriate position from the wall, and determine the distance between the inlet of the sewer pipe and the ground level, and pay attention to match the pit distance of the squatting toilet. Pit distance refers to the distance between the center of the toilet sewer pipe and the wall, generally 300mm, 350mm, 400mm, 450mm, etc. Choosing the right squat toilet is the first thing to choose is to choose the right pit distance. >>>More
The squatting toilet is changed to a flush toilet, and if the waterproofing is not done well after the change, it will cause water leakage downstairs. Alteration is required to change the water pipe, to raise the water pipe to the level of the floor tiles, no matter where the water leaks, as long as it leaks from your bathroom is your responsibility. If you have more questions, you can click on ID to consult.