Hello, I would like to ask about my downstairs saying that my bathroom is leaking

Water leakage occurs, you have to find the cause first, the leakage is a water source, first try the water, there is no problem to try the water, and then try whether it is really seeping from the brick joint, and there is water from other places! Analyze the same, find the reason, and finally talk about the treatment, more information, better suggestions, the best photos, free professional technical consultation for concrete waterproof leakage repair, exempt from repairing today, leaking tomorrow; Repair every year, the trouble of leaking every year.

The first thing is to remove the water vapor from his own bathroom bath, and the second is that the puc pipe in the sewer is cracked.

You can do a test, plug the bathroom floor drain, store water on the ground, and then go downstairs to observe the water leakage, if the water leakage is aggravated, it is caused by water seepage on the surface of the tile. If this is the case, you can use the three musketeers of 100 million waterproof musketeers without planing bricks, directly on the surface of the tile to repair, after the maintenance does not affect the original decoration surface, and the waterproof effect is permanent after maintenance.

If it's a leaking sewer pipe, the downstairs leak will get worse when you flush the drain. The leaking water inlet pipe is constant, and there will be dripping water downstairs regardless of whether there is water upstairs or not.

First of all, the leakage first look at the water traces, what you said is around the toilet, then I suggest you check the toilet water connection first, because generally speaking, after the waterproof construction is completed, if there is no special circumstance, it will not cause leakage, you look at the toilet angle valve water inlet, remove the angle valve, disassemble the decorative cover, if the water pipe embedded wire head is retracted into the wall to install the angle valve, the raw material belt is not wrapped in place, it will also cause water seepage, and the appearance of this water seepage can not be seen, because the decorative cover is blocked, and the wire head is in the brick, the water will leak down the wire head, Waterproof kenben is useless. If it is a hollow brick, it will soon leak downstairs. Check and inspect the bathroom water pipe joints, if you are really not at ease, you can contact the decoration company to arrange the water pipe installer to come to the door to test the pressure, eliminate the water pipe problem, and then the last thing you want to see is to have to smash the floor tiles, if it is a mortar waterproof material, there is a leak and smash there, and then complete the repair; It can't be made of coil or polypropylene material, and the floor tiles are all smashed.

The waterproofing is not done well.

This situation is generally due to the leakage of the water pipe, and the leakage point is to plane the wall.