-
Anonymous users2024-01-23It is not recommended to use open wires for the power distribution lines in the bathroom, and the wires should be routed in the wall as much as possible.
In areas where water can splash, there should be no splices in the wires.
Switches, sockets and other facilities in the bathroom should be installed with splash-proof boxes.
-
Anonymous users2024-01-22How to walk the bright line is not good-looking, it is recommended that you buy that kind of wire box, square strips, bathrooms are tiled, buy some double-sided tape can be glued directly to the wall, more beautiful than directly running wires, try to be next to the top, after all, the bathroom always uses water, and the lower part will always splash water. Remember to install a waterproof box when installing the socket. It should be a lot better and safer.
-
Anonymous users2024-01-211. It doesn't matter, it's best to bring a splash-proof socket!
-
Anonymous users2024-01-20As long as the line clamp is arranged, it is still very good-looking, but the surface-mounted bottom box is not so practical, and it is recommended to use the concealed bottom box, that is, the surface-mounted concealed box. The height of the socket depends on the furniture you want to place.
-
Anonymous users2024-01-19The area of the bathroom is generally not large, if you route the line inside, try to follow the position of the corner line, so that it looks neater and more neat, of course, the relevant wiring should be fixed with plastic nails, so that it is more firm.
-
Anonymous users2024-01-18It's not very nice to walk the bright line, you can walk on the top of the kicking angle, and if you fix it with a small nail, the color is the same as the background wall, no one will notice this.
-
Anonymous users2024-01-17Generally, the open line is to be routed first, and then in the groove off the line, the general trunking is to go to the edge and corner, close to the ground is generally placed on the baseboard.
Generally, the trunking is white, and it is generally white in order to match the wall. If your wall tiles aren't white, you'll have to think of something else. For example:
wiring grooves, and then add some decoration to cover them off; Or if the wiring is far away, you can walk from the inside of the toilet roof; The most beautiful way is to cut the tiles and seal the line under the wall tiles, and the project is relatively large.
-
Anonymous users2024-01-16The wire box walks along the corner of the wall, and the color and wall surface are all the same, which is more beautiful.
Cover it with an open wire pipe, because the tile is porcelain white, and the open wire pipe is also white, there is no color difference, the open wire pipe is square, you can choose how big the open wire pipe is according to the number of wires, the open wire pipe can be fixed along the corner of the wall, the general hardware store of the open wire pipe is more, economical and convenient, the method of installing the open wire pipe, use a few points of glue on both sides, and put transparent glass glue between the points, and press the open wire pipe in the position you want to install.
Toilet socket installation height:
1. The installation height standard of the washing machine socket is about off the ground. >>>More
No. But it also depends.
If there are lines on the tiles of the bathroom, the water vapor generated during bathing will cause condensation on the tiles. >>>More
If the height design of the bathroom socket is unreasonable, it will cause a lot of trouble, let's take a look at it today, the height of the bathroom socket is standardized. The bathroom uses a lot of water, so in the installation of switches and sockets, it is necessary to ensure the safety of electricity. The height of the mirror lamp is generally 1950mm, the socket and the switch should be level 1350mm, the washing machine socket is generally 1350mm, the socket behind the toilet is generally 350mm, and the electric water heater socket is 1800-2000mm, and the position of the electric water heater should be considered.
Generally, there are 10A: smart toilet is ZR1-10A, washing machine ZR1-10A, hair dryer or shaver ZR1-10A, hand dryer ZR1-10A, electric towel rack is ZR1-10A, and 1-2 are reserved next to the washbasin powder room. >>>More