Can there be bright lines on the tiles in the bathroom?

No. But it also depends.

If there are lines on the tiles of the bathroom, the water vapor generated during bathing will cause condensation on the tiles.

If you forget to reserve the bath bomb line when decorating the bathroom, then you can only line the line from the top of the gusset, which is not as safe as the dark line. Therefore, when decorating the bathroom, you must remember to reserve dark lines, so that these troublesome things will not happen in the future. Of course, when the line is lined up from the gusset, it must be done to prevent leakage.

Yes: See more modified bathrooms, and the lights on the mirror are the bright lines. Of course, if it is a bright line on the shower, you should be extra careful, and you must not line the bright line through the shower head.

The tile of the bathroom should not be lined with bright wires, which is easy to cause short circuit and leakage of wires, resulting in the consequences of electric shock; It should be safer to use a slotted plate or sleeve for routing. After all, human life is at stake, and you can't be sloppy.

Lines can be lined up.

However, to ensure that the open wire does not have exposed joints in the bathroom, or that there are joints, it must be firmly bonded with waterproof electrical tape.

Secondly, put the open wire in a wire box.

It is not recommended to use the socket strip, because the socket strip is not waterproof and splashable, which is easy to cause leakage, after all, there is more water in the washing machine.

Yes, just do a good job of waterproofing. However, this practice is unsightly and affects the decorative effect of the body. If necessary, rework is required to re-wiring the wiring.

Bathrooms generally have bathing facilities, and the water vapor generated during bathing will produce condensation on the tiles, so try to avoid clear lines to prevent leakage. If it is necessary to line up the wires, an isolated open wire groove must be installed and waterproofed with glass glue in the lid.

If possible, in order to ensure the integrity of the tiles, it is recommended that it is best to bury the wire in the outer wall of the bathroom, drill wall holes in the required position, and connect them to the socket in the room.

If you can line up the line, it is not good-looking and affects the appearance.

Personally, I recommend that the first one can be installed

I recommend that you use a drag strip to be safer. The topstitch is also too ugly.