What to do if the balcony floor tiles are leaking

Treatment of water seepage of balcony floor tiles:

1. To use black gold steel waterproof roofing spray and then spray the tile gaps as a whole to achieve water seepage.

2. Lift the floor, dry the water, the water under the floor tiles can only wait for the slow volatilization, and after the balcony is completely dry, the floor tile side joints should take better measures to carefully block the leakage water with weather-resistant materials.

3. You can find a developer to solve the water seepage of balcony floor tiles.

Answer 1, the place where the wall tiles and floor tiles meet should be cleaned with an old toothbrush, absorb the water, dry it, and put on the anti-mildew silicone (there are two kinds of white and black, about 20 yuan, don't buy it under 10, the quality is not good), rub it with your index finger, and it will take 12 hours.

2. It is better to determine the leakage point, remove the local floor tiles (the area is slightly larger), and redo the waterproofing with polyurethane waterproof coating, and it is more reliable to do the closed water test sample.

3. I personally suggest that under the premise that the mason master guarantees the quality of maintenance (based on construction technology, at least 5 years of free warranty as a guarantee), the method of the second master is feasible. In this way, the demolition place is small, and the loss cost is less.

4. Basically, remove the tiles around the connection between the tap water pipe and the floor tile more than 50cm, stop the toilet water for more than a week, wait for the water contained in the cushion to dry naturally, and then remove the cushion layer to expose the waterproof layer at the disassembled position, brush the flexible cement-based waterproof coating twice on the waterproof layer, wait for the waterproof layer to dry and solidify, and then fill in the dry cement sand layer and paste the tiles. At the connection between the water pipe and the new tile anchor with plugging king, it is solid.

It's my pleasure to help you! Have a great day! If you think it is helpful to you, please give it a thumbs up! Thank you!

It is recommended that you find a property or construction team to open the floor and re-do the waterproofing.

If you don't do waterproofing, there is no way, the safest way is to knock it all out, and then redo the waterproofing, and then paste it to turn it, and completely break the root.

Go buy waterproof glue and then put it on the cement, and the fine sand is just on the outside.