How do you make surround sound in your living room? With a four position audio jack?

Updated on Living room 2024-01-27
1 answers
  1. Anonymous users2024-01-23

    The placement of speakers requires some attention. The general principle of placement is that the tweeter is placed in a high place and the woofer is placed in a low place. The two front speakers should be placed on either side of the monitor, with the center channel speaker in the center and the two front speakers in the same line.

    The two surround speakers are placed facing each other at the back of your body, making it easier to get better sound reproduction. After the speaker is placed reasonably, not only the timbre is natural, but also the sound image positioning is better, and the sense of space and depth of the sound will be stronger, and the natural sound of surround sound can be vividly and vividly played. In addition, it is recommended that you should pay attention to a few points when choosing a home theater channel satellite speaker.

    The larger the size of the subwoofer, the better, and the size of the woofer determines the maximum undistorted output sound pressure. Therefore, the large bore is a guarantee of bass shock. The average subwoofer caliber is around inches.

    If you want to be powerful, it's better to be 8 inches. The 5-inch subwoofer is not very effective and can basically be abandoned. The larger the satellite speaker unit, the better, in order to ensure the treble, it is best to use a two-way satellite speaker, so that the sound quality is generally better than the full-band unit.

    Power is also one of the important factors in obtaining a powerful effect, with enough power to ensure that the sound does not soften at high volumes.

Related questions
2 answers2024-01-27

Collectively referred to as the "craft door" inside is bonded with small wood (general fir wood), and then glued on the wood grain plywood you choose outside, to do a good job with the seller to tell the seller to fill all the fir inside, the splint should be thick, the thin effect is not good! >>>More

3 answers2024-01-27

This tile adhesive method, also known as dry paste method, uses a new type of paving auxiliary material, which belongs to the method of modifying mortar cement. The floor tiles of the entrance aisle do not need to be soaked in water in advance, and the bottom surface does not need to be wet, as long as the basic conditions of the installation are better, so that the working conditions have been greatly improved. Its adhesion also exceeds that of traditional mortar cement, especially suitable for small and medium-sized projects and home decoration with a poor working environment. >>>More

3 answers2024-01-27

1.The ceiling can be designed with a concave shape 2It should not be uneven or have sharp corners3The ceiling should not be designed with a mirror 4The color of the ceiling should be light and not heavy5Hidden light strips make up for the lack of lighting.

1 answers2024-01-27

If there are multiple doors in the small hall, the shape of the door should be as uniform as possible, and it must not be one door and one style, too many changes, and the decoration is fancy. For example, it is good to choose light and delicate shapes such as wooden doors with simple and regular lines and frosted glass doors. At the same time, the door sleeve should not be too wide and too thick, so that it is not difficult to create a beautiful and uncomplicated, clean and neat foyer environment. >>>More

2 answers2024-01-27

This problem is a bit difficult, one or two sentences are not clear, although my home is also equipped with partitions, so let's do it, it is recommended that you go to the curtain-search network bar, where there are not only renderings, but also ready-made partitions for sale, kill two birds with one stone, solve your practical problems.