-
You can really do this yourself, if you don't have a template, it is recommended to print it out with waterproof paper, and then you can color it yourself like a small advertisement!
-
There is also a printing technique. For heat transfer printing, select the pattern to print.
-
There is a special kind of lacquer, called crack paint, and then master the spray gun.
-
The complexity of using molds may require several processes.
Open lacquer Open lacquer is divided into full open and semi-open. Also known as water whitewashing. The principle is to preserve the pores of the natural wood and highlight the sense of mechanism. >>>More
The hardware paint you said, first, the process: Baking paint: first of all, the substrate is cleaned and derusted, degreased, soaked adhesion (according to the material at different times) on the substrate three times primer, four times topcoat, each time the paint is sent to the dust-free constant temperature baking room, baking. >>>More
The old way:
First add some toning powder to the white paint, adjust the original snow-white paint to milky white, yellowing, no primer, directly use the topcoat, because it will be polished later, so the topcoat is more wear-resistant. >>>More
It mainly depends on your process, is it spraying? Spraying? Roller coating? >>>More
Khan: I can't handle it.
You can squirt with Bead once in a while. >>>More