-
Anonymous users2024-01-23The hardware paint you said, first, the process: Baking paint: first of all, the substrate is cleaned and derusted, degreased, soaked adhesion (according to the material at different times) on the substrate three times primer, four times topcoat, each time the paint is sent to the dust-free constant temperature baking room, baking.
Second, the paint film. Testing method: touch the edges and corners of the painted door panel with your hands to see if it is smooth and flat; Observe the color of the edges and corners to see if they are the same color as the door panels.
Lacquer: smooth edges and corners, the same color. It proves that the paint film is uniform and the color is full.
3. Texture. Detection method: check the light to see whether there is orange peel on the surface of the painted door panel.
Paint: The surface of the door panel is smooth, without grain and orange peel.
Fourth, the surface. Testing method: touch the surface of the painted door panel with your hands to see if there are dust particles and bubbles.
Paint: The surface of the door panel is flat and smooth.
5. Wear-resistant. Detection method: hit with a hard object.
Baking paint: no abnormal condition, no damage to the paint film.
The door in this picture is obviously made by a novice, and the color spray is uneven, deep and shallow. Especially the edges of the lines. >>>More
Open lacquer Open lacquer is divided into full open and semi-open. Also known as water whitewashing. The principle is to preserve the pores of the natural wood and highlight the sense of mechanism. >>>More
The old way:
First add some toning powder to the white paint, adjust the original snow-white paint to milky white, yellowing, no primer, directly use the topcoat, because it will be polished later, so the topcoat is more wear-resistant. >>>More
It mainly depends on your process, is it spraying? Spraying? Roller coating? >>>More
Khan: I can't handle it.
You can squirt with Bead once in a while. >>>More