-
OK. The switch is installed inside and outside the bathroom, which does not affect the normal use of the ventilation fan, and the switch is placed outside, which will also avoid the safety problems caused by the air being too humid or getting wet at the beginning.
The common bath bomb exhaust hole sizes are 75cm, 80cmBe sure to pay attention to its size when purchasing.
It is best to buy a bath bomb before bathroom decoration, there are many types of bath bombs, and in general, ceiling-mounted bath bombs are basically with exhaust function. Therefore, you need to install it according to your own situation.
Wiring is very important when installing a bath bomb. Routes need to be reserved in advance. Depending on the size of the bath bomb you purchased.
The installation holes of the bath bomb must be pre-installed on the ceiling, and the frame made of wood is required to fix the bath bomb, and the exhaust pipe of the bath bomb must be set at the same time. The bath bomb can only be installed after the ceiling is completed. This is mainly for the sake of convenience.
If the ceiling is done in advance, you need to ask an electrician to see if the wiring is enough, or whether it needs to be adjusted, for wiring work, it is best to find a professional electrician. Then ask the carpenter to see if the ceiling is drilled. At the same time, make a wooden frame to fix the bath bomb.
In the ceiling bath bomb is basically with exhaust function, according to the situation, the first thing to do is to make a hole in the wall. Let the exhaust pipe run through the inside.
It is best to make an exhaust hole, which can remove the turbidity in the bathroom in time, and also facilitate the timely discharge of water vapor.
-
I suggest that you install a bath bomb, mainly for heating, and then install a ventilation fan, mainly for ventilation, because when you arrive in winter, the bath bomb will produce a lot of fog, if you don't install a ventilation fan, people will feel very stuffy and uncomfortable for a long time inside, and it is also very unsafe, because your bathroom has no windows, which belongs to the dark toilet.
-
It is best not to have a switch socket in the bathroom, as there is a danger of moisture leakage.
Originally, the wiring should be laid out during the renovation, if you add it at zero o'clock now, it is best to find a way to make a hole to connect the wire and switch to the outside.
-
It's not a question of whether you can or not, it's that it has to be fitted out of the door.
This is common sense for electricians.
-
Yes, it's convenient.
-
Yes, but it is too laborious to renovate the bath bomb, and it is necessary to connect the switch of the ventilation fan to the outside of the wall from the bathroom.
-
Yes, it's just not convenient to use.
-
Yes, it's actually safer.
The reason why the bath bomb switch is broken.
1. The lamp is burned. >>>More
Ying Mu Nian should be a problem with the motor, and it is estimated that there is a lack of oil; >>>More
The power supply is connected to the middle, and the four control lines are connected to L1-L4
The switch controls the live wire, otherwise the light cannon is electrified.
Normal bath bomb:
Poor heating: Bath bombs work by raising the temperature of the bathroom through the heat radiation of the heating bubble. However, it can only heat the local area that radiates to it, but not the whole bathroom, which has an uneven temperature. >>>More