-
Anonymous users2024-01-23When choosing floor tiles, it is important to consider the following aspects: First, it depends on the brand. Only well-known brands of floor tiles, the quality of their building materials can meet the national standards, and the content of harmful substances can be within a safe range.
Second, it depends on its anti-pollution ability, if the family is very busy and can only clean once in two or three days, then choose the one with better anti-pollution ability. Third, if there are elderly people and children at home, you must do a slip resistance test when purchasing.
Specifically, the selection of floor tiles can start from the following aspects:
1.To see if the color of the tile is pure. Mainly observe whether the color of the back of the tile is uniform and consistent.
2.It is necessary to observe whether the particles of the cross-section of the tile are fine. The cross-section here does not refer to the cutting surface around the tile, but to the fracture of the tile fragment.
Generally speaking, the fracture is fine, hard and brittle, and the color is the same. Because the ceramic tiles with fine particles have strong waterproof ability, while the tiles with large particles are easy to soak in moisture, which affects the quality.
3.Pay attention to the thickness of the glaze layer. The thickness of the glaze layer is the thickness of the cross-section of the glaze. Glaze is the most expensive material in the cost of ceramic tiles, and the thicker the glaze, the better the quality.
4.To listen. Tap the tile to pay attention to whether the sound is crisp, such as the sound is clear and pleasant, such as the sound is dull, it is inferior.
5.Test the waters. Consumers can pour some water on the back of the tile and pay attention to how quickly the tile absorbs water. After a few minutes, see if the marks left by the water on the front are obvious. The density of tiles that infiltrate slowly after the water disperses is large, and the marks left by the water are not obvious, so they are regarded as the top grade.
6.Warp. Take two bricks back to back and face to face to see if they can be in close contact, and there is no phenomenon that the gap is too large to judge whether there is warping.
7.Infiltration. Find ink to apply to the surface for 1 hour and then scrub to see if there are traces, no traces are good bricks, and those that have infiltration are resolutely not selected.
The brick function of the living room and the balcony is not the same, and the balcony must be non-slip. Match the wall tiles. >>>More
If the wall is gray, the floor should be dark gray, black, brown and other colors, in short, slightly heavier than the wall marble. If you feel that the dark color of the board is too heavy, you can use some light-colored brick parquet treatment. Pair-color parquet or counter-row parquet is acceptable. >>>More
If the balcony is a relative unit with the living room, you can use the same floor tiles as the casual servant. If it is not a whole, there is a difference in height Tong Zhao, it is better to use different floor tiles. Balcony floor tiles can be cheaper, with a smaller local excavation rental floor tiles.
Treatment of water seepage of balcony floor tiles:
1. To use black gold steel waterproof roofing spray and then spray the tile gaps as a whole to achieve water seepage. >>>More
For home decoration, the wall and floor tiles of the general balcony are mostly beige and light gray series, which feel more refreshing and can also use neutral colors, warm colors such as beige wood grain color, etc., not suitable for dark colors such as bright red dark brown, etc., because the light of the balcony is brighter, especially some balconies with better orientation, and the general balcony is a living room for rest and drying clothes, which needs a relaxed atmosphere, so it is best to use a lighter color for paving wall tiles on the balcony.