There is normal electricity in the living room at home, but what is the reason for the lack of elect

They are not a wire, the kitchen and bathroom are caused by too much electricity, and they have to find an electrician to repair it.

If the circuit is short-circuited, contact a professional maintenance personnel to do a circuit check.

There are safety hazards! Health is a blessing.

The circuit is controlled separately, and it is recommended to check whether the air opening is tripped, or the kitchen is short-circuited.

There is electricity in the living room and there is no electricity in the kitchen, it should be that the electric switch in the kitchen tripped, or the electric switch burned out, the line failed, etc., you can start from a simple start to find the reason.

1. Check whether it is tripped, see if the gate box has tripped, and if it jumps, close the gate.

2. If there is no tripping, measure whether the voltage of the upper and lower terminals of the electric switch is normal, and see if the electric switch is broken. Measure that there is electricity at the terminal of the upper part of the electric switch, and if the voltage at the bottom of the upper gate is low or there is no power, the electric switch is broken, and it is necessary to replace it with a new gate suitable for large electrical power.

3. The above is normal to check whether the line is broken, this kind of fault is relatively rare, but there are still some. The inspection method should first use an electric pen to test whether the socket has electricity, if there is a zero line is broken, if there is no power is the problem of the live line, specifically according to the line direction to check the section.

The main reason for the power failure is that the power of the electrical appliances is too large, and it may be that the current caused by the virtual connection of the wire increases.

This is the basic common sense of household electricity, and it is also a problem that is often encountered. It may be that the kitchen overload protection switch has tripped, check the distribution box at home, there is a row of switches in it, see which handle is down, just push it up. If you don't know how to do these operations, then find a community property electrician to deal with it!

There may be other reasons, which cannot be listed here, there is no scientific and technological content, so it is better to find a property company to send someone to deal with it.

1. There is normal electricity in the living room at home, but there is no electricity in the kitchen, and it is obvious that there is a broken circuit in the connection between the kitchen and the living room. You can use the measurement point pen test to find the place where the circuit is broken.

2. Circuit: A conductive circuit composed of metal wires and electrical and electronic components, called circuits.

3. Parallel circuit.

It is one of the two basic ways to make the current between the circuit elements that are connected in parallel have more than one independent path to each other, which is one of the two basic ways to form a circuit. Household electricity is large.

Some of them are parallel circuits.

Because the circuits at home are all connected in parallel, the living room has a kitchen, and it is obvious that there is an open circuit at the connection between the kitchen and the living room (not the same as a short circuit, the contact is poor when the short circuit is not good, don't be confused) You can use the measuring point pen to find the place where the circuit is broken I am from the Department of Physics of Anshi University, so this question is a piece of cake for me

It's not a line, the kitchen and bathroom are a line, maybe there is a socket in the kitchen and bathroom burned, just find out the socket, my home is the same, the socket is burned black, and then connect it, hehe, I don't know if it's the same as yours.

See if the living room and kitchen share a switch, and now the decoration circuit is generally separated.