What should I do if the kitchen water pipe is leaking?

First, to determine what kind of pipe you add for floor heating, if it is a PE-X series pipe, you can choose to use a clamp-type joint to repair the leakage. If it is a PE-RT pipe, it is best to choose a hot melt method to repair it (you can also choose a clamp).

2. After judging the leakage, remove the ground, slowly knock off the backfill layer, and expose the pipe for modification.

3. The surface looks like a water leak, and there are water stains on the doorway stones in the kitchen and living room, but the pressure gauge of the system is always there. Later, it was found that the temperature of the kitchen water pipe was low, and there was moist air under the wooden floor, and the water vapor heated by the floor heating condensed on the water pipe, forming condensation. It's similar to a mist of water on a window in winter.

Fourth, if your home is a wall-hung boiler, you can install a pressure gauge for your home's floor heating system, and observe that if there is indeed a water leak, the water pressure of the system will drop to 0. If it is not adjusted to 0, it is not a water leak.

Sewer Leakage Remediation:

If there is a leak in the PVC sewer pipe, we can go to the store to buy a PVC water pipe to connect it ourselves, first we cut the damaged old water pipe, and then put the interface into one end of the pipe, so that the cutting position of the other end is just level with the other opening of the interface, so that it can be straightened, and then send it directly to this end, so that both ends have a certain cross distance (length), and then disassemble it. Finally, apply PVC glue to the inside of the two ends and the outside of the two sewer pipes. In addition, users can also buy waterproof tape to repair the sewer pipe, first entangle the leaking pipe, and then use mortar waterproofing agent and cement to repair it.

»ÇokºóÔ

In our usual life, many people will have kitchen water pipe leakage in their homes, so kitchen water pipe leakage is a very troublesome thing, and if it is serious, it will also affect the relationship between neighbors and neighbors.

1. What should I do if the kitchen water pipe is leaking?

1. When the water pipe in our kitchen is leaking, we have to check which side is leaking, and find the cause of the leakage.

2. Under normal circumstances, we need to close all the water valves first, and leave a nozzle connected to the pressure rod for suppression.

3. When we suppress, the pointer should point to the between, if it stops in between, then we look at the pressure value after half an hour, if the pressure value does not exceed, it means that the water pipe is not leaking, it may be other reasons, if it is exceeded, it means that the water pipe is leaking.

4. The water pipe is leaking, we are naturally making up the leakage, at this time we can see if the water pipe is loose, if the interface is loose, we will tighten the interface of the water pipe.

5. We can apply a layer of waterproof glue after the connection port of the year, so as to prevent the water pipe interface from loosening again.

6. The leakage of the kitchen water pipe, may be the leakage of the upper and lower water pipes, we can contact the relevant responsible person to replace or repair the water pipe, or use waterproof glue for post-repair repair, and then use mortar to further repair it.

The above is a summary of the relevant content and information about what to do if the kitchen water pipe is leaking, I hope it can help you. If you have any other questions, you can leave a message in the comments below, and we will solve the problem for you in time. Finally, if you have any questions about home furnishing and home decoration, you can pay more attention to Qeeka Home.

1. You need to check the kitchen sewer pipe, you must find out where it is leaking, if it is an open pipe, it is easier to find, if it is a dark pipe, it will be much more troublesome, and you have to press the water pipe to know which water pipe is leaking.

2. Suppress first, the method of suppression is to connect the hot and cold water pipes together with a hose, then close the main valve, and leave a nozzle to connect to the pressure pump for pressure. Look at the pressure gauge of the pressure pump to stop between pointing, and then wait for half an hour to check the pressure value, if the number does not exceed the drop, then there is no leakage.

3. Now that the leakage point has been found, the next step is to fill the leakage. There are some cases of leakage in the kitchen pipe just because the joint is a little loose or degummed. What should I do if the kitchen water pipe leaks in this case, the interface is loose, and it can be tightened, and then the main thing is to prevent leakage later, so the interface has to be waterproofed, and the waterproof glue can be brushed.

Then I had to have a kitchen water pipe leaking because the water pipe was aging and cracking. Change the pipe, find the leaking section of the pipe, use a small saw to saw off the leaking place, then cover it with an interface, then connect the newly bought sewer pipe joint with the old water pipe joint, and finally use a hot melter to hot melt connect the new pipe.

First of all, the specific cause of the water leak must be found;

1. Cause of water pipe joint leakage: usually due to the water pipe and the faucet are not connected well.

2. The cause of sewer pipe leakage: the water pipe is blocked by foreign objects for a long time or the water pipe is hardened, resulting in the rupture of the water pipe.

3. Causes of plastic water pipe leakage: water pipe hardening or long-term foreign body blocking the water pipe leads to rupture.

4. The cause of water leakage of iron pipes: rust and corrosion of water pipes will also lead to water leakage, and the general situation of iron water pipes is that the water pipes are not replaced in time due to long-term dripping, resulting in rust.

1. Solutions to leakage water pipe joints:

What to do if the kitchen water pipe joint is leaking? If the fitting itself is broken, you will need to replace it with a new one. If there is a water leak at the wire opening, remove it and replace it with a rubber pad, apply thick white paint to the silk opening, and wrap it around with a special ribbon.

2. Solution to sewer pipe leakage:

If it is a PVC water pipe, you can go to the store and buy a new PVC water pipe for splicing. The specific method is: the interface is first inserted into one end of the pipe, the cutting position is flush with the other end, straightened, and sent directly to this end, so that both ends have a certain cross distance (length) and then disassemble it, and apply PVC glue to the inside of the two ends and the outside of the two sewer pipes.

You can buy waterproof tape to repair the sewer pipe, just wrap it up, and then use mortar waterproofing agent and cement to wipe it on.

It's better to find a professional company, if you can't handle it yourself.

3. Solutions to plastic pipe leakage:

First, use a small hacksaw to see off the leak - the saw edge should be flat.

Use sandpaper to lightly sand the newly exposed port, not too much.

Apply to the port with special glue and let it dry for a while; At this time, glue is applied to the inside of the "bamboo" joint.

After everything is ok, apply an appropriate amount of glue to the seams to ensure that there is no leakage.

4. Solution to iron pipe leakage:

Because of the corrosion of the overall water pipe, close the main valve of the water pipe, replace the whole section of the water pipe, and put the two ends on the screw buckle and screw it on.

Cabinet leakage is generally in two places: 1. Around the dishwasher, you can shovel off the original glue here, scrape it clean, dry it, seal it with glass glue, and use it after 24 hours of solidification. 2. The water pipe under the dishwashing sink generally cannot be repaired here, and the new pipe can be replaced directly, once and for all.

It's easy to go to a hardware plumbing store and buy a hose for water supply and replace it with a small board yourself.

Remember to stop the water first.

Let the property management office take care of it.

If you rent a rental house, you will find a landlord to deal with it.

I can find someone to fix it.