How to remove the socket with a lid in the bathroom

There is a gap at the bottom of the waterproof box, from the notch, you can directly pry open the panel of the socket switch (the bottom is not from the middle position of the left and right sides of the socket switch, and the gap where the waterproof box is connected), pry down the panel of the socket switch first, only to see the screw nail that fixes the socket switch, it is to fix the socket switch and the waterproof box together, so it is extremely wrong to pry the waterproof box. Pry the panel open, remove the screw, the socket switch and the waterproof take are all removed... Note that the waterproof box may be glued to the wall, so you don't need to worry about the waterproof box, just remove the socket switch.

This is a waterproof box, there is no screw connection between the waterproof box and the socket, directly use an electric pen to pry, when prying, from the bottom or the left and right sides, find holes or lines, there is a different place, you can save some effort. Pry open the panel after prying open the waterproof case. Only then can you see the two M4 screws on the left and right inside, use a Phillips screwdriver.

I won't talk about the rest.

Is there glue around the waterproof box? Use a wallpaper knife to cut and separate.

A circumferential face line can be pried open, and then the screws are exposed.