-
Anonymous users2024-01-231. The integrated ceiling is a combination of metal square plate and electrical appliances. Generally, it is divided into heating module, lighting module and ventilation module. It has the characteristics of simple installation, flexible layout, and convenient maintenance, but because of the integration, it also causes many people to replace the lamps and lanterns without knowing it.
2. Replace the integrated ceiling lighting fixtures.
1. Use suction cups or suction cups similar to small hooks to disassemble the ceiling plate;
2. Remove the ceiling plate with a suction cup, and remember to use an object that is too sharp to avoid scratching the ceiling plate;
3. Remove the ceiling gusset;
4. Remove the lamp panel that needs to be replaced;
5. Take out the faulty and damaged lamp;
6. Replace the lamp with a new one;
7. Connect the power socket of the new lamp;
8. Restore the lamp panel;
9. Restore the disassembled integrated gusset to its original state and complete the repair.
-
Anonymous users2024-01-221. The integrated ceiling is a combination of metal square plate and electrical appliances. Heating modules, lighting modules, and ventilation modules are divided into a chaotic manner. It has the characteristics of simple installation, flexible layout, and convenient maintenance, but because of the integration, it has caused many people to replace the lamps and lanterns without knowing it.
2. Replace the integrated ceiling lighting fixtures.
1. Use suction cups or suction cups similar to small hooks to disassemble the ceiling plate;
2. Remove the ceiling plate with a suction cup, and remember to use an object that is too sharp to avoid scratching the ceiling plate;
3. Remove the ceiling gusset;
4. Remove the lamp panel that needs to be replaced;
5. Take out the faulty and damaged lamp;
6. Replace the lamp with a new one;
7. Connect the power socket of the new lamp;
8. Restore the lamp panel;
9. Restore the integrated gusset plate that was disassembled to the original state, and the maintenance is completed.
-
Anonymous users2024-01-21No matter what style of ceiling lamps, there is an outer cover, there are fixing screws around the lampshade, you can use a thin metal sheet to wipe into the gap in the ceiling plate next to the lamp and gently take out the board to see, the ceiling plate is stuck on the reset is also simple, I do home decoration tile paving do not understand the electrician,
-
Anonymous users2024-01-20Generally, it is directly embedded in the keel frame, and it is enough to push it up with a little force.
-
Anonymous users2024-01-19Pull it down directly, pin the clip with your hand, pull out the inner thread, and unload it
-
Anonymous users2024-01-18The lamp has a side, just grab it and pull it out.
The integrated ceiling generally uses LED lights, and generally speaking, the gusset plate and electrical appliances of the integrated ceiling are integrated, so there is no need for a frame.
It is usually prying open with an oiler's shovel blade stuffed into the gap between the two allegroes, and can be replaced with something similar. If you are afraid of trouble, find a decoration worker in your community to get it, and it is estimated that you will not sell it without 50 yuan.
It is recommended to use aluminum gusset of aluminum profile, the degree of oxidation of plastic gusset is more serious than that of aluminum, and it will become extremely brittle after a long time. The plastic gusset is not resistant to high temperature, and the ceiling is in high temperature weather, which generates a lot of heat, which shortens the service life of the plastic gusset.
You can't change the light, see if the driver is broken, the driver can be replaced if the driver is broken, you can't fix the panel if it's broken, you can only replace it with a new one, what kind of panel take a photo and send it to me, see if it can help you.
Where there is no lamp, groove on the top surface, and use the original line if there is a lamp.