The cause of the toilet leakage problem has not been found

It should be the embedded parts leakage, waterproof paint or something is useless, it is best to use a waterstop needle, but the price is more expensive, the leaking embedded parts are surrounded by a circle and a beveled mouth, and the cement slurry is plugged under the brush, and the king is leveled with a blister without leakage.

I don't know what waterproof materials and brand names were used to do waterproofing before?

You can find someone to grout and get where there is a leak. It should work well.

1.The connection between the toilet and the drain pipe is leaking, because the height of the drain pipe is not enough, the depth of the outlet of the toilet into the drain pipe is not enough, and the connection is not filled tightly; The waterproofing treatment in the bathroom is not good, and after the toilet is used, the floor is watery, the walls are damp, and even the lower roof wall is damp and dripping.

2.Water leaks at the entrance to the well on the squatting pit. During construction, the water interface of the squatting pit was smashed and did not find that the rubber bowl on the water was not tied, or after being tied with iron wire, the iron wire was rusted and broken and the rubber bowl and the water connection of the squatting pit K was broken, so that the squatting pit was wet after the use of the water wall, causing the lower roof and the wall to be damp and dripping.

3.The installation of sanitary ware is not firm, the reason is that the embedded wooden bricks are not licensed or embedded at the end during construction, the installation of sanitary ware is not firm, and the sanitary ware is loose and unstable when used, causing damage or leakage of pipeline connectors.

<> if the water seeps into the bottom of the sewage pipe, that is, on the floor, then there is no way to drain the water, and it must seep down to the next layer, most of which seeps down the place where the sewage pipe passes through the floor.

Seepage prevention is passive, and drainage of stagnant water is the fundamental solution.

How to operate it will depend on the specific situation of the toilet.

Seepage prevention is passive, and drainage of stagnant water is the fundamental solution.

How to operate it will depend on the specific situation of the toilet.