-
Anonymous users2024-01-23Tighten the cap of this inspection opening;
If there is still water seepage, unscrew the cap, replace the sealed rubber ring and then cover and tighten it;
If there is still water seepage, unscrew it, wrap the raw material tape around the thread, then cover the lid, and tighten it to solve the problem.
Hello: see if the access port is broken, please change a maintenance port if it is broken, if it is not broken, please see if the mat in the maintenance cover is broken, take it down and take a look, or buy a new one, and then tighten the cover. Either wrap the silk with raw rubber and tighten the cover.
About 24 hours later. After the waterproof coating is painted to form a waterproof layer (about 24 hours later), the water storage is 20 high, and after 24 to 48 hours, see if the water is significantly reduced or go downstairs to see if there are wet water spots on the roof, and if not, it means that the waterproof construction is successful. >>>More
There are traces of water seepage around the urinal drain pipe (not ruptured) and it drips down the drain very slightly.
(1) Use bricks, and then use cement sand and plaster bricks; >>>More
After the renovation, the toilet is too noisy, which material is better for sound insulation?