What should I do if the protective film of the solid wood floor is broken?

Updated on Solid wood 2024-01-27
3 answers
  1. Anonymous users2024-01-23

    You're talking about paint, right? That's not a "protective film", but a layer of paint made on the surface! In this case, it cannot be re-"pasted", and the paint on the paint-free floor is very difficult to repair, and it is generally dealt with by replacing the floor.

  2. Anonymous users2024-01-22

    The phenomenon you are talking about is that the surface paint is peeling off, which is caused by the poor adhesion of the paint, if you are a wooden floor that has just been installed, you can ask the merchant to help you solve it. But according to what you said, it has become moldy, which is caused by the high moisture content of the wooden floor, one is that you use it improperly, and the other is that the moisture content is too high when it leaves the factory.

    Solution: First, ask a professional to sand off the paint as a whole, and then reapply the paint. Second, remove it and take it to the manufacturer to repaint .......

  3. Anonymous users2024-01-21

    This phenomenon is actually caused by the peeling of the paint on the surface of the solid wood floor, which is caused by the poor adhesion of the paint. It is recommended to ask a professional to polish off the paint as a whole, and then repaint or remove it to the manufacturer to repaint.

    Floor maintenance: Wax the floor regularly to protect the moisture inside the floor and make it less likely to crack and fall off. Put water in a basin when the air conditioner is turned on.

    Maintain air humidity. If the air conditioner is turned on too much in humid and sultry weather, the moisture of the solid wood floor will dry too quickly, causing the paint to swell and shrink.

Related questions
What should I do if the hardwood floor rings?
6 answers2024-01-27

If it squeaks, it may be because: the gap between the floor is smaller, if the weather is humid, the floor will expand when the humidity increases, so the bite of the floor (tongue and tongue and groove) is too tight and produces sound, usually after a year of climate change, the material of the floor will be stable, and it will not sound. If you feel uncomfortable with the noise, you can spray some wood oil essence in the gap to reduce friction. >>>More

What to do if there are scratches on the solid wood floor
11 answers2024-01-27

Teach you a method, buy a little better floor wax and fine-tune it to a color similar to the color of the floor, and then wax it, the effect will be good. >>>More

What to do if the solid wood floor creaks
7 answers2024-01-27

1. The pavement ground is uneven.

The wooden floor of the stage was not leveled before paving, resulting in cracks on the floor, and the squeak of the floor rubbing would be heard when the feet stepped on. >>>More

What should I do about the overall sound of the solid wood floor?
10 answers2024-01-27

1. Ground leveling.

The sports wood floor is paved and the ground should be leveled. Before paving, the flatness of the ground must be measured, strictly speaking, the height difference of the whole ground in a room should be less than 3mm, and the ground that does not meet the conditions should be leveled before paving. >>>More

What should I do if I get scratches on my hardwood floor?
2 answers2024-01-27

If the scratch is not very deep, as long as it is sprayed with liquid wax, it will not be obvious when it is rubbed out, if the scratch is deep, you need oily putty to adjust the same color as the floor to flatten the floor, and after sanding, spray paint to spray the repair or the whole small floor.