-
Anonymous users2024-01-23Follow these steps to achieve good results:
1. There is a gap in the ceiling (plate) to be caulked. It is recommended to use a worry-free toughness caulk for caulking, which has toughness and can reduce cracking.
2. Scrape putty powder directly on the ceiling (plate) and it is easy to fall off, so it is recommended to scrape the putty powder once (TB), and then scrape the putty powder (2-3 times) after drying. If you want to apply latex paint, proceed to the following process.
3. After the surface of the putty layer is polished, apply latex paint.
Installation steps: 1. The keel ceiling hanger is fixed with expansion bolts and reinforced concrete slabs; >>>More
1. Clean up the base layer.
2. The density of light steel keel frame or 3*4 wooden keel frame (for fire treatment) is not more than 600*600 >>>More
Installation method of soft film ceiling.
Step 1: Install the keel. >>>More
If there is a suspended ceiling, a ceiling-type sprinkler is used to be located under the ceiling; If there is no suspended ceiling, the splash tray is under the bottom of the roof sheet, depending on the horizontal distance from the beam. A row of sprinklers must be added to the > combustible ceiling, which is generally sprayed up and down. For details, please refer to the "Code for the Design of Automatic Sprinkler Systems", which has 3 relevant provisions and 1 table.
You can refer to our construction drawings and replace the gypsum board with mineral wool sound-absorbing board. Mineral wool sound-absorbing board ceiling construction, special-shaped specifications of the product needs to be processed and customized, product processing customized, 156 of the number, 156 in the front, 3268 in the middle, 9388 in the back four places, when installing the ceiling sound-absorbing panel, start from the center line part of the room to both sides of the installation. >>>More