After decorating the bathroom, can you also install a bathtub?

Generally, you can get · As long as the bathtub you buy is not too big and the bathroom can't be fitted, it's good that the bathtub doesn't need to knock on the floor tiles Just connect the bathtub to the floor drain.

It can be fitted with a bathtub. However, there are many restrictions on the installation of bathtub macro sheds, and the bathtub is small and impractical; It's too big, and the bathroom is not enough. So it's still prudent.

To take into account the size of the bathroom space, for the bathroom area is too small family, it is best not to install a bathtub, because the bathtub is not used much, both occupy the space and water, and the portability is not very practical, especially for office workers living in a fast-paced city, who are accustomed to the fast-paced life will suddenly slow down and will not be used to it, and the use of showers is more suitable.

Five-step method of bathtub installation:

1. Test whether the sewer is leaking.

Before installing the bathtub, you should first install the drain accessories where the bathtub is placed, then fill the bathtub with water, close the drain, and check whether the bathtub is leaking. When the water exceeds the upper overflow and the water slowly flows out of the overflow, you can reach under the tub and feel the back of the overflow to see if there is any leakage. After testing the overflow, the next step is to check the airtightness of the sewer, and you can choose the method of standing to observe the airtightness of the sewer.

Second, the leveling of the bathtub.

When placing the bathtub, it should be noted that one hidden section of the drain should be lower than the other end, so as to ensure the smooth discharge of sewage in the future. However, some bathtubs have a slope for drainage at the bottom of the tub, so you don't have to think about the location of the tub when placing it.

3. Sand filling. Some cast iron bathtubs may seem to be quite strong, but their thermal conductivity is very fast, and the bottom of the bathtub should be firmly and smashed with medium river sand during installation. In the process of filling the river sand, the sewer should be sealed with glass glue first, and then the entire sewer and sewer pipe should be entangled with a plastic stove concealment cloth to prevent sand from leaking into the sewer pipe.

Fourth, leave the inspection opening.

There is a hole of 300 high and 400 wide at the sewer, and a hole is intercepted according to the size, and then the wooden board (thickness 40) of the same size, which has been waterproofed and anti-corrosion treatment, is pasted on the wooden board according to the calculated number of bricks and the arrangement on the board. Extend the edge of the brick and apply sealant to the box.

Fifth, tiling. The tiling of the bathtub skirt does not need to be scratched, and the brick platform should be smeared with a layer of cement mortar on the surface, and then wait for two days before the tiles can be laid. Tiling is a very troublesome thing, because the ground leaves a slope, and the bathtub is flat.

Therefore, each large brick needs to be polished to a different size, but not a lot at one time, so as not to grind again in the future. In addition, the upper edge of the brick should be tucked under the rounded edge of the bathtub so that no sunny angle is formed.

If you want to install it, then the space in your bathroom must have a allowed space, as long as there is space can be installed, but it may be a little unsightly to connect the water into and out of the water! Find a master who installs the bathtub in the decoration industry to help you customize it!

You can ask the renovation company to come.

If that doesn't work, you can install that kind of glass ring door instead, which is very warm and saves the bathroom area.

After-installation bathtubs involve receptivity, site size possibilities, the modification of water supply and drainage pipes, the selection of functional styles, and even transportation.

1. Please carefully consider and actually experience the use and maintenance of the bathtub, and then decide after being able to accept the tedious and meticulous cleaning work of the bathtub, and do not make the imaginary comfort and beauty be broken by the cumbersomeness of reality;

2. Square bathtubs are roughly available in the following sizes:

Length: 1 m 9;

Width: m, m, m, m, m;

Height: between meters and meters;

Please measure the feasibility of the site according to the size;

3. The transformation of water supply and drainage pipes and local paving, which can be completed by professional masters;

4. There are many bathtub materials, functions and styles, which should be selected in combination with the actual situation, and determined after trying to experience the physical store;

5. I have to remind you about the transportation problem, if the bathtub is too large, it may be necessary to dismantle the corresponding decoration in place, and this cost must be considered.

The water inlet and outlet can be installed if they are left.