The flush toilet doesn t go up with water, and it doesn t go into the water every time it is flushed

1. It is because the thimble in the water supply valve may not be able to go up, and there is another possibility that the filter screen of the water supply valve is blocked. If it is blocked, you can remove it and clean it yourself. If the thimble is broken, you will have to replace it with a set of water pieces.

2. The flush toilet was designed by a British priest named John Harrington. The toilet uses the water discharge knob and the water plug to control the water discharge and water storage, when using, rotate the water discharge knob, use the metal rope or nylon rope connected to the water plug to pull up the water plug, the water plug pulls out the water outlet pipe port upward, and the water outlet pipe puts the water into the urinal and uses the gravity of the water and the kinetic energy converted by the potential energy to flush the excrement dirt into the sewer pipe. A flush toilet is made up of the following main parts:

Water inlet pipe, outlet pipe, seepage pipe, water plug (water inlet and outlet), float, water discharge knob and lever, water replenishment mechanism, water tank, urinal (urinal has a bend pipe connecting to the water tank).

3. The flush toilet is composed of the following main parts: water inlet pipe, water outlet pipe, seepage pipe, water plug (water inlet and water outlet), float, water discharge knob and lever, water replenishment mechanism, water tank, urinal (the urinal has a bend pipe connecting the water tank).

4. Principle: use the water discharge knob and water plug to control the water discharge and water storage, when using, rotate the water discharge knob, use the metal rope or nylon rope connected to the water plug to pull up the water plug, the water plug pulls out the water outlet pipe port upward, the water outlet pipe puts the water into the urinal and uses the gravity of the water and the kinetic energy converted by the potential energy to flush the excrement dirt into the sewer pipe, and at the same time, when the water level drops to a certain water level, the water plug is re-pressed into the port of the outlet pipe due to the negative pressure generated by the gravity of the water, and the water outlet is blocked. At this time, the water is no longer released and a new stage of water storage begins; When the water level drops, while flushing the urinal, the float together with the lever is driven by the gravity of the float due to the drop in the water level, and the lever is opened to start synchronous water replenishment; In the water replenishment stage, the buoyancy and lever of the float are used to control the water replenishment of the water tank, and when the float descends to the lowest position, the water plug is pressed into the mouth of the water pipe by negative pressure, and the water tank begins to store water; The water inlet pipe is connected to the water pipe, which is responsible for the input of the water source, and when the water supply reaches a certain height, the buoyancy of the water will lift the float up to the linkage lever, close the water supply mechanism, and stop the water supply.

The thimble inside the water supply valve may not be able to go up, and there is another possibility that the filter screen of the water supply valve is blocked, if it is blocked, you can remove it and clean it yourself. If the thimble is broken, you'll need to replace it with a water fitting.

See if the float on the water is leaning against the wall of the tank, blocking the float's up and down movement.

How many years have you been using? Has it just been renovated? It is recommended that you change to a new set.

This has also happened to my toilet, and it seems to be the cause of the component inside, but I can't get it myself. Call the repair master and change something! Not a big problem. Or go to the shops that sell components and ask, they probably know.