The cement master pasted the bathroom wall tiles with half of the tile glue and half of the cement m

The cement master used half of the tile adhesive and half of the cement to paste the bathroom wall tiles, does it have a big impact? Will it fall later.

The bad thing is that cement mortar is affected by many external factors and is easy to fall off. In addition, the hardness of porcelain front tiles on the market is getting higher and higher, and the focus is on poor water absorption, so the tiles often fall off the silver. From the appearance, tile adhesive and cement are almost the same, mainly mixed with water, and then directly used to paste tiles.

However, tile adhesive has an advantage that cement does not have, that is, it is less affected by external factors, and it is resistant to low temperature and water. The bad point may be that the price is expensive, and there are many bad tile adhesives on the market, and there may even be the problem of excessive formaldehyde. Compared with cement and tile adhesive, the performance of tile adhesive will be better, the point is that you don't need to run the tile in advance, you can paste it directly.

There is no need to paint a thick layer on the wall, and it is basically very firm when pasted on. Of course, the price of good things will generally be on the expensive side, so there is no need to use tile glue in all places, you can use it in the kitchen and bathroom, because these places are often wet, and it is easy to fall off with ordinary cement.

The above is the full <> of the teacher's reply

2.Have more questions? The teacher can continue to answer your <>

Looking forward to serving you again <>

I wish you a happy life and all the best! 4.If you are satisfied with my service, please give a thumbs up and wish you all the best again! Peace and joy <>

The cement master used half of the tile adhesive and half of the cement to paste the bathroom wall tiles, does it have a big impact? Will it fall later.

Dear, it's an honor to be hungry for your problem The information that the teacher found out for you here is: This construction method is not standard, because of tile adhesive. itself is made of high-quality cement.

Quartz sand, cellulose and other materials are made of scientific proportions, so other materials can not be added during construction, and he added Souque cement without authorization during construction, so it is easy to appear hollow ,.. in the later stage of the increase of expansion and leakage coefficient

Lu Do: The above is all the teacher's reply <>

2.Have more questions? The teacher can continue to answer your <>

Looking forward to serving you again <>

I wish you a happy life and all the best! 4.If you are satisfied with my service, please give a thumbs up and wish you all the best again! Peace and joy <>

Yes. Tile adhesive is through continuous improvement, the final production of high-quality products, if in the later stage of the arbitrary change of its ratio, such as the addition of cement, then will lead to the performance of tile adhesive affected, after the tiling is very easy to appear hollow, falling off.

The cement master used half of the tile adhesive and half of the cement to paste the bathroom wall tiles, does it have a big impact? Will it fall later.

does not affect, engineering common practice.

The bad thing is that cement mortar is affected by many external factors and is easy to fall off. In addition, the hardness of tiles on the market is getting higher and higher, and the focus is on poor water absorption, so the tiles often fall off.

From the appearance, tile adhesive and cement are almost the same, mainly mixed with water, and then directly used to paste tiles. However, tile adhesive has an advantage that cement does not have, that is, it is less affected by external factors, and it is resistant to low temperature and water. The bad point may be that the price is expensive, and there are many bad tile adhesives on the market, and there may even be the problem of excessive formaldehyde.

Compared with cement and tile adhesive, the adhesive performance of ceramic tile adhesive will be better, the point is that you don't need to run the tile in advance, you can paste it directly. There is no need to paint a thick layer on the wall, and it is basically very firm when pasted on.

The bad thing is that cement mortar is affected by many external factors and is easy to fall off. In addition, the hardness of tiles on the market is getting higher and higher, and the focus is on poor water absorption, so the tiles often fall off. From the appearance, tile adhesive and cement are almost the same, mainly mixed with water, and then directly used to paste tiles.

However, tile adhesive has an advantage that cement does not have, that is, it is less affected by external factors, and it is resistant to low temperature and water. The bad point may be that the price is expensive, and there are many bad tile adhesives on the market, and there may even be the problem of excessive formaldehyde. Compared with cement and tile adhesive, the adhesive performance of ceramic tile adhesive will be better, the point is that you don't need to run the tile in advance, you can paste it directly.

There is no need to paint a thick layer on the wall, and it is basically very firm when pasted on. Of course, the price of good things will generally be on the expensive side, so there is no need to use tile glue in all places, you can use it in the kitchen and bathroom, because these places are often wet, and it is easy to fall off with ordinary cement.

The cement master used half of the tile adhesive and half of the cement to paste the bathroom wall tiles, does it have a big impact? Will it fall later.

Hello, a kind of construction method is not standard: 1, and then slightly stirred before it can be used, and he added cement without authorization during construction, aggravating the risk of tile falling, with a toothed scraper fiber to apply the glue on the working surface, because the tile adhesive itself is made of high-quality cement, then the expansion coefficient increases in the later stage is easy to appear hollow, which helps to increase the adhesion force. 2. Quartz sand, so that it is evenly distributed, cracked, etc., and into a strip of toothed, cellulose and other materials are made of scientific proportion, so other materials can not be added during construction, and the following is the standard method of tile adhesive construction.

3. Pour the porcelain paste powder into clean water and stir it into a paste (mixing ratio, knead the tile on it within the drying time: 20kg of powder and 6kg of water), after mixing, it needs to be placed still for about 10 minutes, thank you for your consultation, I am happy to answer for you, I hope it can help you, I wish you a happy life and a smooth work.

The cement master used half of the tile adhesive and half of the cement to paste the bathroom wall tiles, does it have a big impact? Will it fall later.

Yes. Tile adhesive is through continuous improvement, the final production of high-quality products, if in the later stage of the arbitrary change of its ratio, such as the addition of cement, then will lead to the performance of tile adhesive affected, after the tiling is very easy to appear hollow, falling off.

The cement master used half of the tile adhesive and half of the cement to paste the bathroom wall tiles, does it have a big impact? Will it fall later.

The cement master talked about Zheng sticking the bathroom wall tiles with half of the tile glue and half of the cement mixed together, does it have a big impact? Will it fall in the future: Hello dear, I'm glad to be able to answer <> for you

Pro, the impact is great, the cement master will drop the bathroom wall tiles with half of the tile glue containing half of the song and half of the cement mixed together, the impact will be great in the future will drop the tile adhesive do not mix with the cement, if mixed together, it will affect the performance of the tile adhesive, cause the adhesion to decline, the phenomenon of falling bricks, hollowing drums.

As we all know, cement mortar is generally used for tiling, but in recent years, there have been more tile adhesives on the market, and I don't know which one is better to use!

Let's look at the cement mortar first, that is, it is mainly cement, add yellow sand and some waterproof additives, and then mix with water, which is basically zero pollution, high adhesion, and preferential price.

But the bad thing is that cement mortar is affected by many external factors and is easy to fall off. In addition, the hardness of tiles on the market is getting higher and higher, and the focus is on poor water absorption, so the tiles often fall off.

From the appearance, tile adhesive and cement are almost the same, mainly mixed with water, and then directly used to paste tiles. However, tile adhesive has an advantage that cement does not have, that is, it is less affected by external factors, and it is resistant to low temperature and water. The bad point may be that the price is expensive, and there are many bad tile adhesives on the market, and there may even be the problem of excessive formaldehyde.

Compared with cement and tile adhesive, the adhesive performance of ceramic tile adhesive will be better, the point is that you don't need to run the tile in advance, you can paste it directly. There is no need to paint a thick layer on the wall, and it is basically very firm when pasted on.

Of course, the price of good things will generally be on the expensive side, so there is no need to use tile glue in all places, you can use it in the kitchen and bathroom, because these places are often wet, and it is easy to fall off with ordinary cement.

This construction method is not standard, because the tile adhesive itself is made of high-quality cement, quartz sand, cellulose and other materials through scientific proportioning, so other materials can not be added during construction, and he added cement without authorization during construction, then the expansion coefficient is easy to appear hollowing, cracking and other situations in the later stage, aggravating the risk of tile falling, the following is the standard method of tile adhesive construction

1. Pour the porcelain sticker powder into clean water and stir it into a paste (mixing ratio: 20kg powder 6kg water), after stirring, it needs to stand still for about 10 minutes, and then stir slightly before use, which helps to increase the adhesion force.

2. Use a toothed scraper to apply the glue on the working surface to make it evenly distributed and form a toothed shape.

3. Knead the tiles on the top during the drying time.

The impact is not big, and it generally does not fall.

As long as you don't use brute force, you won't drop it.

No. The purpose of the glue is to stick firmly.