-
Anonymous users2024-01-231 Substrate Inspection Check whether the substrate is damaged. Greasy dirt. Hollow drum, whether the size of the gap exceeds the standard. If possible, apply a sealing primer before the construction of the substrate as much as possible, so as to prevent oil from penetrating into the board and cannot be removed.
2 Substrate treatment Determine that the substrate is qualified: no damage. Hollowing, cracks, etc., such as all-purpose glue on the oil stain on the substrate. Cement stains. Tea stains. Perspiration stains should be cleaned so as not to affect the uniformity of the color of the substrate.
3 Frosted paper Polishes the substrate as a whole to remove burrs. Edges.
4 Sealing primer A good sealing primer has a strong sealing effect on the substrate, can penetrate the plate, and plays a protective role.
5 Polishing Polishing after applying the sealing primer. It is convenient to point up the nail hole.
6 Nail Patch Hole Gun Nail. Iron nails are indispensable for the reinforcement of the substrate, but the plate will be damaged, so for the integrity of the board surface, the damaged parts and the gaps in the substrate should be patched and repaired.
Prepare the following materials.
Bai material: sandpaper, small shovel, oil. >>>More
The first step in coloring solid wood furniture.
Solid wood furniture is a very environmentally friendly one, but also a particularly strong one, now the solid wood furniture on the market not only has a variety of styles, but also has a variety of colors, that is because the solid wood furniture is colored, the waterproof effect of the colored solid wood furniture will be better, the visual experience will be more perfect, if you want to color the solid wood furniture, first of all, we have to polish the furniture, the furniture that has just been created will inevitably have some burrs, we have to use sandpaper to polish these burrsMake sure that there is no bulging or cracking, and then you can color. >>>More
If you don't have a paint, apply three primers (clear), then a base coat (the color you need), and finally a topcoat (clear).
Base Materials:
1 Substrate Inspection Check whether the substrate is damaged. Greasy dirt. Hollow drum, whether the size of the gap exceeds the standard. If possible, apply a sealing primer before the construction of the substrate as much as possible, so as to prevent oil from penetrating into the board and cannot be removed. >>>More
If it is a color essence, wipe it with a rag, if it is a color paste, use a brush to brush, then spray the primer, and then repair the color, and the topcoat will be completed after the color repair.