How to fix the loose plastic door screws in the bathroom

Updated on Bathroom 2024-01-28
5 answers
  1. Anonymous users2024-01-23

    The method of loosening the screws of the bathroom door is as follows:

    1. Select a new position, re-drill with a small electric drill, drive into the self-tapping nails, re-tighten the screws, 2. Unable to change the position, use AB adhesive for bonding, 3. Drilling, and fixing the blind rivets.

  2. Anonymous users2024-01-22

    The plastic door screws in the bathroom are loose, you can punch holes in the door frame and wall, and then use the screws to fix the set, the specific operation steps are as follows:

    A1. Use an electric drill to punch the left side of the top of the door frame with the wall.

    2. Screw on the screws to fix.

    3. Use an electric drill to punch holes in the left side of the bottom of the door frame with the wall.

    4. Screw on the screws to fix.

    5. Use an electric drill to punch holes in the right side of the top of the door frame with the wall.

    6. Screw on the screws to fix.

    7. Use an electric drill to punch holes in the right side of the bottom of the door frame and the wall.

    8. Screw on the screws to fix. (Done).

  3. Anonymous users2024-01-21

    I met Bai before

    I've been to similar questions, I want to share it with you, I don't know if I can help you? Bathroom door.

    version is the kind of"Plastic steel"materials, maybe use time.

    After a long time, the door panel and the door frame can not be tightly occluded when the door is usually opened and closed--- the lower edge of the door panel will also bump the door frame or floor (there are other situations, so I will not list them) Lift the door handle hard, and you can feel the door panel panic. If the above description is met, it is likely to be the following:1

    The screws are loose. The location of the hinge can be found, (if you don't know.)"Hinge"What is it, you can directly ask a professional to repair it) and then remove the plastic sheet buckled in the hinge, you can see the screws, and then use a screwdriver to tighten the screws. (Note:.)

    If the door panel deviates from the position of the door frame, please correct it and then fix the screw) The second situation: Another situation of loose screws is not only that the screws are not tightened, but that the plastic door is damaged, resulting in screws"Slippery"Poor fixation. You can remove the hinge and put it back on in a new position!

    Case 3: If the hinge is broken, you can go to a building materials or hardware store to buy a new one.

    The most important point: if you are not sure about your hands-on ability, you should be cautious and don't fix bigger problems.

  4. Anonymous users2024-01-20

    Where do you order the door, where to call their people to help you fix it. It's better not to try it yourself.

  5. Anonymous users2024-01-19

    Since I don't know the specific situation of the loose screw, I have prepared the following methods for you for your reference.

    1.Choose a new position, re-drill with a small electric drill, drive in the self-tapping nails, and re-tighten the screws.

    2.It is not possible to change the position, and AB adhesive is used for bonding3Drilling, blind rivet fixing The blind rivet diagram is as follows.

Related questions
Is it better to fix the screws of the towel rack in the bathroom, or is it better to stick it? Thank
4 answers2024-01-28

It is fixed with screws, and the stickers or suction cups are not firm, the reliability is very poor, and it cannot withstand heavy pressure, and the clothes are easy to fall off when they are put too much.

Loose toilet sink pipes cause water leakage
3 answers2024-01-28

This kind of problem is very common. The closure of the drain was not done well when the basin was installed, and there are many ways to repair it yourself. The easiest way is to connect the water until the connectors are not loose, and then put glass glue on the joints until they are dry and can be used. >>>More

Bathroom roof expansion screws dripping
3 answers2024-01-28

Regardless of whether the expansion screws of your house have penetrated the roof board, as long as the waterproofing of the upstairs is done, there will be no water leakage. Only if the upstairs is not waterproofed will there be a source of water leakage. There should be a gap between the large expansion screw and the roof slab so that water will leak down the gap.

What to do if the toilet washbasin pipe is loose and causes water leakage
1 answers2024-01-28

Press and hold the ring of the drain at the bottom of the washbasin, tighten the joint of the basin to the right with the other hand, and then put the water to try to leak it.

How to install and fix the toilet pipe in the bathroom
1 answers2024-01-28

In home life, the most intimate area is, of course, the bathroom. As a common area of the family, the bathroom is the most frequently used, but the space is the smallest. In this case, the layout design of the bathroom is particularly important. >>>More