How to install and fix the toilet pipe in the bathroom

Updated on Bathroom 2024-01-28
1 answers
  1. Anonymous users2024-01-23

    In home life, the most intimate area is, of course, the bathroom. As a common area of the family, the bathroom is the most frequently used, but the space is the smallest. In this case, the layout design of the bathroom is particularly important.

    If the layout is not reasonable, it will cause many inconveniences in daily life. Only a reasonable and appropriate layout is conducive to a comfortable life. Bathroom layout design needs to follow several principles, such as space maximization, rationalization of layout, material optimization, etc., in addition to waterproofing must be done well, bathroom layout design of household items must also be properly arranged.

    Optimization of the space in the layout design of the bathroom.

    The so-called optimization of space is to use as much space as possible. Most restroom layout designs are designed with this principle in mind. Because the area of the bathroom is too small, there is too much time to use, and there are many functions, so the space needs to be expanded as much as possible.

    Therefore, it is best not to use a bidet toilet as a bathroom for family use. The bidet toilet occupies more space, which is not conducive to space saving. It is also best to have some small items in the washing area at the same time, and it is better to not need to purchase or equip items separately.

    Optimal use of materials for bathroom layout design.

    In the decoration, we do pay attention to the economical use of materials. However, when decorating the bathroom, we should pay more attention to the service life of the material. Since the bathroom is exposed to water for a lot of time, it is easy to perish if the material is not good.

    Therefore, in the layout design scheme of the bathroom, most of the ceramic tiles and glass products will be used, but there are few wooden products. But even then, you need to be very careful with the material. Especially when doing waterproofing, you can't be careless.

    Rationalization of the layout of the bathroom layout design.

    In the bathroom layout design scheme, the toilet is usually divided into three areas: bathing, convenience and washing. If the space is large enough and separated from each other, it is certainly more convenient to use.

    However, if the space is small and needs to be combined, you need to be very careful. In particular, how to combine bathing and urinal requires special care.

    In the layout design of the bathroom, as long as you pay attention to these three points, you can make the family life more satisfying and make the decoration more in line with the needs of family members.

Related questions
3 answers2024-01-28

The toilet reserves the distance between the sewer and the wall, and the toilet selection tool can be 30 cm to 40 cm according to the room type of the toilet and personal preferences, which is relatively normal, and the strong one who can reserve 20 cm in actual operation, and the actual distance from the center line of the sewer, the actual distance of the bridge deck can be 32 cm to 42 cm, and there will actually be an error of 10 cm, which is very normal.

2 answers2024-01-28

1. Waterway part.

1) Waterway design should first think about all the equipment related to water, such as: water heaters, toilets, wash basins, bathtubs, etc., their location, installation methods and whether hot water is needed; >>>More

7 answers2024-01-28

The bathroom squatting bedpan is installed as follows:

1. At the sewage outlet of the installed product, reserve the sewer pipe at the appropriate position from the wall, and determine the distance between the inlet of the sewer pipe and the ground level. >>>More

1 answers2024-01-28

1 Make a hole in the floor slab.

2. Before the installation of the drainage pipeline, the civil engineering negotiation shall be required to pay off, find the size of the dump of sanitary appliances and the height of the rejection, install the trunk pipe, the riser pipe to the branch pipe in turn, and verify whether the coordinates are accurate again before the civil engineering plugging the floor hole. >>>More

1 answers2024-01-28

It can be used with Huabian, which is specially used for water seepage treatment of rigid joints. >>>More