How to remodel the toilet sewer pipe

If it is on the first floor, it can be changed, and if it is on the second floor including the second floor or above, it is necessary to consult with the neighbors.

The bathroom of home decoration often encounters a troublesome problem, that is, the toilet drain of the bathroom is not very suitable, and the decoration design needs to be painstakingly conceived if it is renovated for the convenience of use. Four common ways to remodel your toilet drain teach you how to move your toilet drain pipe.

Displacement of a small area:

Use a special shifter for lifting, there is cm, it is recommended not to exceed 10cm shift, it will affect the effect of punching and draining.

Wide range of displacement:

Floor elevation (generally 20cm high), discharge pipes, pipes should have a certain slope, but the distance should not be too long, the distance is long, the slope of the pipeline should be larger, the ground elevation will increase, and the flushing effect will also be affected. The drain pipe can be connected to the original pothole, or it can be connected to the sewer main with 3 passes.

Floor slab perforation displacement:

If it is a duplex or a villa, you can make holes in the floor slab and re-take the installation. Wall-mounted toilets:

If possible, you can choose a wall-row toilet, as long as you build a short wall, and directly connect the pipe to the sewer main.

If the first tenant has not renovated, it is the best way to make holes in the floor of their own bathroom and change the location of the unreasonable sewer holes.

If the downstairs residents have already renovated, they can only find a way in their own homes.

The washing machine drains quickly and has a large amount of drainage, so you must use the original sewer pipe "You can't use the sewer after you have changed it", otherwise it will backwater to the ground "There is really no way to buy an extended washing machine drain hose and drain it into the floor drain that is far away".

AS FOR THE DRAIN OF THE BASIN, IT CAN BE CHANGED TO WALL DRAINAGE, "THE DRAINAGE HOLE IS 40MM HIGH FROM THE GROUND", AND THE OTHER END CAN BE CHANGED TO THE TOILET DRAIN PIPE.

The ground does not need to be raised.

To prepare floor drains, sewer pipes. Here's how:

1. There is a floor drain left in the place to take a bath, as the main floor drain, which is the lowest point of the whole bathroom, 2. The sewer pipe of the wash basin, the sewer pipe of the washing machine, if there is a bath room, the sewer pipe of the bath room, and the sewer of the toilet are generally not changed.

It depends on whether your bathroom has a caisson or not. If there is a caisson, all the drain pipes are laid under the caisson, and the drain main is passed through the drain pipe channel of the caisson, so we only need to change the pipes in the caisson; If it is without a caisson, one way is not enough to raise the position of the drainage pipe, and the other is to place the drainage pipe under the floor slab by passing through the floor slab to change and lay, but this is to build a house or villa to carry out, if it is a commercial house can not be done, it must be raised, and the general commercial housing is a caisson.

Do you want to destroy the ground? If the ground is resurfaced, it will be solved. The best way is to drill holes in the ground, and then take over from downstairs, it is estimated that this may not be big, but once and for all, the water is smooth, and it is not easy to block.

No more, only by slotting in the ground and burying the sewer pipe, the ground does not need to be raised. Remember, the ground waterproofing must be done well, water seepage is troublesome.

Heightening the centimeter is also a way, the other way is to open a groove in the ground, and install the pipe after waterproofing, so as to make a hidden drainage, and leave a larger slope. The interface is glued together, do more waterproof, and choose a good brand pipe.

Because the pipes of the drainage system on the same floor are buried in the wall.