The difference between multi layer solid wood board and MDF can you be more detailed

Multi-layer solid wood panels and MDF are mainly found in:

MDF is a board that is formed at one time after solid wood is crushed by high temperature and high pressure, which is afraid of moisture and is very easy to mildew and deformation when damp. Generally, MDF is used for furniture, because the nail holding force of HDF is poor, so it is rarely used for cabinets, and it is more suitable for flooring.

Multi-layer solid wood board is more moisture-resistant than MDF and not easy to deform, but the price is more expensive than MDF, and it also needs waterproof and sunscreen for maintenance.

Which is better, multi-layer solid wood board or MDF, but also depends on what the actual use is, according to the different characteristics of the board to make a more suitable choice, so that it can make the best use.

The difference between multi-layer solid wood board and MDF can you be more detailed

Multi-layer solid wood panels and MDF are mainly found in:

MDF is a board that is formed at one time after solid wood is crushed by high temperature and high pressure, which is afraid of moisture and is very easy to mildew and deformation when damp. Generally, MDF is used for furniture, because the nail holding force of HDF is poor, so it is rarely used for cabinets, and it is more suitable for flooring.

Multi-layer solid wood board is more moisture-resistant than MDF and not easy to deform, but the price is more expensive than MDF, and it also needs waterproof and sunscreen for maintenance.

Which is better, multi-layer solid wood board or MDF, but also depends on what the actual use is, according to the different characteristics of the board to make a more suitable choice, so that it can make the best use.

Modern home decoration will use a lot of materials, such as ceramic tiles, cement, plates, etc., with the gradual enhancement of environmental awareness, in the selection of plates will choose environmentally friendly plates. So what is the raw material of environmentally friendly board? Dawang coconut plate to tell you the answer.

What is the raw material of environmentally friendly board?

1. Solid wood plank.

What is the raw material of environmentally friendly board? The first is solid wood panels, which are one of the most common eco-friendly home panels, made of finished wood. Solid wood panels are characterized by being durable, sturdy, and the grain of the wood is very natural, making it possible to make high-quality furniture.

However, the cost of solid wood planks is relatively high, and the requirements for craftsmanship are also high, and many people are more difficult to afford the high price.

2. Density sheet.

What is the raw material of environmentally friendly board? The second is MDF, another name is fiberboard, which is a kind of wood-based panel, which is made of wood fibers and other fibers, plus adhesives. According to the different densities, this kind of board is divided into high, medium and low density boards, and the MDF material is relatively soft, easy to process, and the price is relatively low.

Answer: The performance of multi-layer solid wood board is better than that of MDF, and it is more moisture-resistant. It's just that the price is relatively high. The so-called penny is worth the goods, and the poor quality will be broken after a long time. Now developed areas are basically using this kind of board to make cabinet panels.

MDF has very good flatness and is an ideal material for making veneer base boards, but it is afraid of moisture, and it is easy to mildew and deformation when damp, and the price is cheaper than multi-layer boards.

5. Excellent physical properties, uniform material, no dehydration problem.

It is better to choose MDF. Hope it can help you, thank you.

Multi-layer boards : It is also called plywood, because multi-layer board is a plate-like material made of wood segments that are rotary cut into veneer or cut into thin wood by wood planer, and then glued together with adhesive. Usually the fibers of adjacent layers of veneer are glued perpendicular to each other.

Such plates are more stable.

Due to the different layers of gluing, the thickness of the finished product is also different, according to the thickness is different, commonly known as plywood, five centimeters, nine centimeters, twelve centimeters (centimeter: is the meaning of millimeters, the verbal name of millimeters is: centimeter; The verbal name for centimeters is: centimeters).

MDF It is a board made of wood fiber or other plant fiber as raw material, prepared by fiber, applied with synthetic resin, and pressed under the condition of heating and pressurization. Uniform density.

It is the only wood-based panel that can be used for engraving. Therefore, its use will be used for door panels, carved panels, corrugated panels; It is also used for the backplate of the cabinet.

The advantages are: uniform material, not easy to warp, crack, small deformation, smooth surface, high bending strength and impact strength. Disadvantages: Poor moisture resistance, poor ability to hold nails again, and it is not easy to fix again.

Similarly, the surface of the MDF is not good-looking, but his finish is usually made of soft decorative film that imitates wood grain, and the MDF can be used for carving, which can make the effect of imitating solid wood.

Multi-layer boards are made of wood sheets bonded together horizontally and vertically. Since the wood fibers are not damaged and are bonded horizontally and vertically. All effective stress relief. The intensity is good. However, the quality of the glue used for multi-layer boards is critical. If the glue is not good, it will crack.

MDF is a board made of wood crushed pellets and laminated pressing. Because the wood fibers are completely destroyed, all the boards are very poorly strong. Moreover, the content of glue is very large, and it is inevitably not environmentally friendly. The smell persists and the pollution is severe. Poor strength against the wall will collapse.

Both plates are afraid of water. It will swell and crack when exposed to water.

Let's talk about the answer first: solid wood multi-layer board is better.

Medium Density Fiberboard (MDF)) is a board made of wood fiber or other plant fibers as raw materials, prepared from fibers, applied with synthetic resin (glue), and pressed under the condition of heating and pressurization.

Solid wood multi-layer board is made of three-layer or multi-layer veneer or thin board, the surface is made of high-quality solid wood veneer or technical wood as fabric, and is made by several processes such as cold pressing, hot pressing, sanding, and health preservation.

Compared with plywood in the ordinary market, solid wood multi-layer board has the advantages of small deformation, high strength, good internal quality (small holes and no delamination after sawing), good flatness, etc., because the solid wood multi-layer board has the characteristics of not easy to deform and good excellent performance of regulating indoor temperature and humidity, and the surface layer of solid wood veneer material has the texture and feel of natural real wood, so it is more selective, favored by consumers, and widely used in wardrobe cabinets and cabinet doors.

The surface of the MDF is smooth and flat, the material is fine, the performance is stable, the edge is firm, and the surface of the board is decorative. However, MDF has poor moisture resistance. In contrast, MDF has a worse grip force than particleboard, and if the screws are loosened after tightening, it is difficult to fix them in the same position.

Compared with the two materials, the solid wood multi-layer board is undoubtedly the better one, the material selection, environmental protection should be more reliable, the nail holding force, moisture-proof is better, but the solid wood multi-layer board is also the more expensive one, and finally add that if it involves carving, the solid wood multi-layer board can not be done.

Answer: The advantages of using multi-layer solid wood boards are that the price is more affordable, the stability is better, and it is easier to take care of. But there are also some shortcomings, which are not easy to repair and maintain. In addition, its production process is very demanding, and there are many installation steps, which are very cumbersome.

The advantage of MDF is that it is relatively easy to process various coatings, and the paint can be evenly coated on it, and it is also a beautiful decorative board. The disadvantage is that it is not moisture-proof and not waterproof, so it is easy to break. Comparing the two materials, it is recommended that you use multi-layer solid wood panels.