What is the installation process of soft film ceiling?

Wuhan warp and weft soft film ceiling soft film ceiling installation.

In order to install the ceiling film correctly and smoothly, we need to prepare the installation tools, including shovel blades, paper cutters, ash knives, hair dryers, glue, etc., and the installation process is divided into three steps:

Step 1: Check before installation. Whether the keel, lamp port, sprinkler, tuyere, residue, wall, and closure can be installed. Check whether the power cord, cord head, sprinkler head, etc. are well bandaged to prevent damage to the soft film.

Step 2: Installation of the translucent film. Turn on the built-in lamp, whether the light is stable, whether there is color difference, whether the edge of the keel leaks, install the soft film after cleaning the residue, try to avoid the soft film from contacting dirt, dust, etc., and ensure that the soft film is clean and tidy throughout the process.

Step 3: Flexible film installation. Find out the corresponding soft film, use a cannon or hair dryer to coordinate to reasonable heating, the distance should not be too close, and the temperature should not be too high to prevent damage to the soft film.

Install according to the diagonal and point-to-point points, the edge strip, the corner position, and the soft film are smooth and smooth, and the welding seam is adjusted in a straight line. During the installation process, we must pay attention to the protection of the soft film, do not let the soft film touch the sharp and angular items around it, and pay more attention to the damage of the shovel to itself. After the shovel blade is pushed into the buckle seam, make sure that the knife and the seam are in firm contact, and pay more attention to the uniformity of the force when pulling into the keel groove, do not use too much force, otherwise the shovel blade will slide out of the buckle and hurt yourself or the adjacent soft film.