-
Anonymous users2024-01-23It is best to pave directly to the top surface;
Of course, it is also possible to paste half the height of the wall, but it needs to be noted that the tile is pasted to half of the problem, and this problem must be solved, otherwise it will lead to very ugly.
There are many choices, any color can be, it depends on what color your ground is, it should match the color of the ground, and the color of the furniture later.
Be careful not to damage the waterproofing and pipes, and check the hollow drum rate after pasting. That's all that matters.
Hello, the color of the background wallpaper is matched according to the color of the wallpaper in the overall interior, as long as the color matching is reasonable, there is nothing wrong with the dark color, I have seen a bedside background wall rendering that Dong Ying has done is good, it is also dark, you can go to see if it is the effect you want I hope it can help you.
Generally, it is best to paste the tiles near the washbasin and shower room to a meter height. >>>More
According to the diagram, make a shape of the same width on the wall corresponding to the low air duct ceiling position, and then make three horizontal lines of the sedan stool on the wall between the door and the door, and make gypsum board for the material. In the later finish, you can use latex paint to do color jumping treatment with the wall. Or close friends travelers are pasting gray mirrors on the wall modeling, and the seams are also very individual.