-
Anonymous users2024-01-23It is recommended not to have brickwork, because its weight is larger, you can use a lightweight partition wall, that is, the use of light steel keel, filled with thermal insulation of rock wool, and the cement pressure plate on both sides of the outer bread, so as to reduce the increased load, but after the expansion, it is recommended that the balcony outside the heavier items are less placed, so that it can be used safer.
The balcony is a relaxation area that can easily be overlooked when renovated. In fact, after the balcony decoration is completed, it will experience wind and rain, and improper maintenance can easily cause the tiles and paint in the balcony area to bulge and fall off. So, what details should be paid attention to when decorating the balcony of a new house? >>>More
balcony floor area.
1. The original design of the enclosed balcony is calculated according to the horizontal projection area of its periphery. >>>More
The concentrated load on the head of the pick beam, only the wall weight has the active 35KN, the uniform load only has the wall weight, and the balcony slab, the beam of the beam, the self-weight of the beam and the live load of the balcony slab. The 4 22 of the reinforcement HRB335 can be used, the stirrups need 8@150, but the cross-section of the pick beam should be 250 500, and the concrete C25. >>>More
Semi-enclosed balcony Disadvantages: 1. No wind, no rain 2, very low utilization rate, nothing can be done on the balcony. Dry your clothes, either wet by the rain or blown by the wind. >>>More
The floor area of the balcony shall be calculated in accordance with the current national "Rules for Calculating the Floor Area" (see the relevant laws and regulations for details). >>>More