How to build a kitchen stove

1. Do a good job in design and planning, you can find some other types of stoves on the Internet for reference, or you can go to the neighbor's house to see more woodworking stoves, because the tile stove and other materials of the stove are no different in appearance, but the frame is different, so find a good reference and do it.

2. After planning, first use cement bricks to pave the bottom, the total height of the stove can be set at will, the conventional height is 80cm, the width of the countertop is 60cm, and it is recommended that the cement bricks be paved with 3 layers. Next, do a count and calculate the number of tiles that need to be standing (two tiles for standing tiles, one tile with structural adhesive back to back, one on each side of the middle to make the tile into three overlapping sides) and the number of tiles that need to be covered. Since the total width of the countertop is up to 60, the width of the standing tile should be reduced from the thickness of the edge hanging of the artificial stone countertop (and the thickness of the cabinet door (and the thickness of the cabinet door and the countertop can not be the same).

Then cut the specifications with a cutter according to the quantity.

3. Cover the cut tile with cement to the bottom of the cement brick, and then clamp a piece of tile back to back for the column and glue it with structural glue to wait for curing. The standing tiles are glued to the bottom tiles with structural adhesive, and here only structural adhesive is used, and this glue takes at least 12 hours to cure, so you have to wait. If you want to be faster, you can fix it with marble glue.

4.Wait for the standing tiles to settle before laying a layer of tiles on top. After laying a layer, you can use the cut broken tiles to put another layer on top of it, which is used to raise the height of the countertop. Next up is custom-made countertops and counter doors.

Masonry refers to the bottom leg of the cooktop.

Put the line according to the design drawing: use red bricks to build bucket bricks (two-inch wall, the building is called 60 walls), and 100 mixed mortar masonry.

Double-sided plastering of cement mortar.

Platen base: support formwork - place steel bars - pour fine stone concrete - health.

The rest is the decorative tiling of the surface layer.

Answer: Artificial marble usually refers to microcrystalline stone, acrylic, microcrystalline stone price is relatively high, and the fish and dragon are mixed, acrylic is easy to age, and it is best to add lining board (12 15 thick multi-layer board) under the countertop. You can also choose non-gaudy stone, durable and affordable.

2. The selection of steel plate is not common, and the stainless steel countertop is mostly seen in the back kitchen of the hotel, and the family is less selected.

3. The glass kitchen wall is selected, and there are few countertops, which are not durable and easy to damage.

4. The cement countertop is usually brick and prefabricated board tiled, which saves money but labor, and the decoration effect is not good.

It's better for you to ask the designer, Cheng Youjia decoration, you refer to it.