The solid wood floor is directly paved with keel or cement leveling

Generally speaking, laying solid wood flooring needs to play keel, and solid wood parquet usually has a larger format size, and can be installed without a keel using the suspension method, which is more efficient, greatly reduces the cost of money and time for installation, and also avoids product quality accidents caused by keel.

When laying parquet, first of all, it is necessary to determine whether the ground is flat, local unevenness can be done local leveling, if a large area is uneven, you can consider self-leveling, if the height difference at home is large, you can consider doing keel, the installation effect of parquet and the relationship between ground flatness is great.

Tips for laying floors.

The direction is usually consistent with the walking direction of the room or according to the user's requirements, from left to right or from right to left to hover in turn, the groove to the wall, between the floor and the wall put in a wooden wedge, leave enough expansion joints, dry areas, the floor is wet, expansion joints should be left small; In humid areas, the floor is dry, and the expansion joints should be left large.

Check the straightness of the floor with the pull line, check with the shop during installation, observe the height difference and gap of the board surface during the trial paving, adjust it at any time, and only after passing the inspection can the sizing installation. Generally, it is spread on the side 2-3 rows, and a small amount of D4 or anhydrous environmental protection glue can be fixed. The rest of the middle part is completely meshed by the tenon groove, and there is no need to apply glue.

Of course, the keel should be put first.

If it is laid directly on the concrete floor, how do you fix it on the concrete floor with floor nails?

3.Because the solid wood floor is suspended on the keel in sections, it can increase the elasticity and enhance the foot feeling4The raised floor can effectively prevent moisture and deformation when it is a solid wood floor5

Under the overhead floor and between the keels, it is convenient for wiring (wiring pipes) and will not hurt the ground, while the ground cement leveling is more suitable for parquet solid wood flooring and composite flooring, and the film cushion is laid under the floor without increasing the foot feeling.

To sum up, we know that different specifications and categories of floors need to be paved with different process materials, and in terms of foot feel, it is better to play keel with solid wood flooring.

2. What are the benefits of hitting the keel?

Leveling the ground: The most important thing to play keel is to level the ground, because the cement ground is not very flat, if there is no leveling, there is a difference of three or five centimeters.

Moisture-proof: It can extend the service life of the floor.

Easy to install: Because the floor is now nailed, the floor is nailed to the nine-centimeter board above the keel.

Noise reduction: Fourth, it is to reduce dryness, when people walk on it, they will feel much gentler, and there is no noise.

3. What problems may be caused by hitting the keel?

Abnormal noise: If the keel on the market is not dry, the keel is easy to shrink after a long time after paving, so that the floor is easy to make abnormal noise.

Perishable: Keels can be very perishable if not treated well.

The process is complicated: the process of beating the keel is very complicated, and it is necessary to destroy the ground, so that the structure of the house changes, and the safety factor is reduced.

Reduced space: After the keel is played, the ground will be raised and the space used in the house will be reduced.

Disposable: The floor cannot be reused after the keel is installed.