What to pay attention to when installing a shower room

The installation of the shower room requires attention to the following steps:

1.Have the necessary tools ready to use.

2.Install the basin: Assemble the basin parts, adjust the level of the basin, and ensure that there is no water in the basin and at the bottom of the basin. The hose expands and expands with distance, connecting the basin floor to the floor drain securely.

3.Test and protection: After installation, it is necessary to test the water to ensure that the water is unimpeded. Fourth, find the position and punch holes: use pencils and levels to determine the drilling position of the aluminum against the wall, and use a percussion drill to punch holes.

4.Install the aluminum: Hammer in the rubber particles at the drilled hole and lock the aluminum strip to the wall with screws.

5.Fixing the glass: Clamp the glass to the hole in the bottom basin and fix it with screws.

6.Install pipe jacking: find the corresponding position above the fixed glass and drill holes, install (straight and beveled) fixing seats and connect the pipe jacking. It is fixed to the top of the glass with a bent sleeve.

7.Installation of the shelf: Align the position of the shelf, tighten the nut of the shelf, fix the shelf glass, and keep it vertical and horizontal. Pay attention to waterproofing under the aluminum material that holds the glass in place.

8.Install the movable door: Install the hardware of the movable door and install the hinge at the reserved hole of the fixed door. After installation, adjust the position of the shaft core of the lotus leaf until the door feels the best.

9.Do a good job of waterproofing: Install suction strips or water-retaining adhesive strips on the side or under the glass as required. Use silicone to make tight joints between aluminum and the wall, glass and basin.

10.Debugging and fastening: check whether each part is comfortable and smooth, and adjust it in time if any problems are found. After adjustment, tighten the corresponding screws to make the whole shower room more firm.

11.Finishing work: Insert the decorative aluminum strip into the wall aluminum to ensure that its appearance is neat and elegant. Finally, wipe the entire shower room clean with a rag.

1. Before the installation of the shower room, the design and planning should be done first, the wiring should be done in advance and the protective switch equipment should be set up, so as not to bury the hidden danger of leakage for future use and endanger the personal safety of yourself and your family.

2. Before installing the shower room, you must choose the right shower room product based on the area and height of your own bathroom. Whether the shower room is too low or too high, it will bring people an uncomfortable feeling, generally speaking, the height of the shower room is about one meter, and it needs to be added 10 cm when installing.

3. The choice of shower room glass is very important, and there is a misunderstanding here that everyone must understand: the thicker the shower room glass, the better. Generally speaking, the glass used in the swing door shower room is larger, but the stability is poor, so you should choose a slightly thicker one.

Shower rooms such as fan-shaped, diamond-shaped, square, and movable doors can choose glass of normal thickness.

1. The embedded hole of the shower room size should be designed before the bathroom is decorated. た?Daddy Mei throws the misty "can be choked? Joy and happiness.