What do you need to pay attention to in the decoration of the shower room, keep in mind the seven ma

Overall, renovation is a very troublesome thing. Step by step, always ready to be deceived, quarrels, and unpleasant places abound. There are also many things to regret, and it is impossible to be perfect, only to minimize mistakes.

Because the water vapor in the bathroom is heavier, it is necessary to choose those materials that have the characteristics of waterproof, anti-corrosion and anti-rust. 2. Ground: Before laying floor tiles, be sure to do a good job of waterproofing; After the tile is laid, it is necessary to ensure that the brick surface has a drainage slope (generally about 1% is appropriate), and the slope is towards the floor drain; After laying tiles, the ground must be closed water test, and the time must be at least 24 hours; When laying floor tiles, pay attention to the joints and alignment with the wall tiles to ensure the overall sense of the entire bathroom, so as not to produce a cluttered impression visually.

3. Wall: The tiles on the wall should also be moisture-proof and waterproof, and the tiles should be smooth, and they should be jointed and aligned with the floor tiles to ensure the overall sense of the wall and the ground; If you encounter the outlet of the water supply pipeline, the incision of the tile should be small and appropriate, so that the flange cover on the water feeder can cover the incision and make the appearance perfect. Fourth, doors and windows:

It is better to have a window in the bathroom to facilitate ventilation; If there are no windows, pay special attention to the details of the door. In order to prevent the water in the bathroom from overflowing, the door boundary should be slightly higher than the inside of the bathroom; The gap between the bathroom door and the ground should be left a little larger to facilitate the return of air; If it is a sliding door, a layer of waterproofing should be made between the sliding door and the bathroom floor tile. 5. Circuit laying:

The wire joints in the bathroom must be hung with tin, and waterproof tape and insulating tape should be wrapped successively to ensure safety; The wire body must be covered with flame retardant pipe; All switches and sockets must have moisture-proof boxes, and the location should also depend on the size and location of the appliance to ensure convenient and reasonable use. 6. Waterway transformation: It is best not to make too many changes to the water supply and drainage lines in the bathroom, if you want to change, it should be determined according to the specific situation, such as the different models of the washing machine, and the location of the water supply and water will be different.

7. Sanitary ware installation: It is best to remember the sewer hole spacing before decoration, and choose bathtubs, baths, toilets, wash basins and other sanitary ware according to the size, so as not to be inappropriate in the size of the decoration; The installation of the toilet should be sealed with toilet mud first, and then fixed with expansion screws or glass glue, so that it is easy to repair when the toilet is blocked.