Can you still change the security door after the decoration?

It can still be replaced, but the engineering aspect is very cumbersome, and the door frame and wall of the security door are connected with cement, so that it will be more firm. If you want to remove the security door, you must break it together with a ring of walls next to it to remove it. Then if you change the door to a new one, you have to re-lay bricks and plaster cement to repair.

The entire replacement process is relatively large and time-consuming.

It can be replaced, but the work is more cumbersome.

1. The door frame of the anti-theft door is bonded with cement with the wall, so as to ensure its firmness.

2. If you want to remove the security door, you must break it together with a circle of walls next to the door frame to remove it.

3. After replacing the new door, re-brick and cement repair.

4. The whole replacement process is relatively large and time-consuming.

It's okay, you can change it directly.

However, if the door frame is not changed, it may not be very coordinated and not very good-looking.

Unless you can find a matching door.

Replace it as a whole, the decoration company will get it for you, and it won't destroy your overall decoration.

If the size of the door is not different, it will not be damaged much, at most the range of the door side is a little affected. 2.The walls will not be damaged, but the walls will be broken and will need to be repainted.

It is possible to change the anti-theft door after decoration, and the methods are: give priority to changing the lock, followed by changing the full set of doors, or one day to change the door panel, and it is also convenient to replace the service.

It is normal to need to replace the door due to uncoordinated aesthetics, or concerns about quality and safety, that is, damage and deformation cannot be repaired.

Changing the lock cylinder is the most common, convenient and low-cost way, and the improvement of the anti-theft level is often achieved by changing the lock cylinder. Netizen This problem should obviously be adopted in this way, and the lock cylinder can be replaced by using an electric drill to knock out the screws.

There are many factors involved in changing a full set of doors, and it is recommended to consider carefully. There are generally four specifications of household national standard doors, with a height of 2050mm and 1970mm, a width of 860mm and 950mm, and a combination of height and width of 4 cases. Replace the floor materials in the connection, the wall will be damaged to a certain extent, need to be repaired later, increase the cost and time, etc.; If you feel that it is not harmonious and beautiful, you can use the decoration behind the door (such as soft packaging, veneer, etc.) to solve it.

For the time being, there is no way to change the door frame in the market, but there will be supply if there is demand, and one day a market-sensitive manufacturer may carry out this business to meet this diversified demand.

If it's just that the screws are broken, there is no need to change the door, just knock the screws off with an electric drill.

If you have to change the door, what door did you use, and then go to the manufacturer of this brand.

Personally, I think it's simple and convenient to change locks.

It can be changed, but it is more troublesome to change! The original security door needs to be removed, and the process of demolition will knock and knock, which may damage the decoration around the door opening.

You can just change the lock cylinder.

If you have to change the door, it will be difficult to find a door that matches your current door frame, and it is estimated that you will need to change them all.

It's totally possible, just measure the size, or go to the seller and say it and let them measure it for you.

Camel Bell 2008

Recommended until 2017 0925

It can be replaced, but the project is more complex.

You can consult the people of the renovation team.