-
Anonymous users2024-01-23If you don't deduct it, it will be according to the area of your ceiling room.
Just like the gypsum board ceiling, digging a light hole in the middle actually increases the workload of workers, which will only overcharge, not less.
-
Anonymous users2024-01-22It can be calculated using formulas.
The algorithm is = (length + width) ceiling width + (length + width) height of sagging.
The calculation rules of the general ceiling are as follows: the ceiling keel of all kinds of ceilings is calculated according to the clearance area between the main walls, without deducting the area occupied by the partition wall, inspection holes, chimneys, columns, buttresses and pipes, and the ceiling decorative surface layer is calculated in square meters according to the area of solid nails (glue) between the main walls, and the area occupied by the partition wall, inspection holes, chimneys, stacks and pipes is not deducted, but the area occupied by the above holes, independent columns, lamp troughs and curtain boxes connected to the ceiling should be deducted.
-
Anonymous users2024-01-21The calculation rules of the general ceiling are as follows: the ceiling keel of all kinds of ceilings is calculated according to the clearance area between the main walls, without deducting the area occupied by the partition wall, inspection holes, chimneys, columns, buttresses and pipes, and the ceiling decorative surface layer is calculated in square meters according to the area of solid nails (glue) between the main walls, and the area occupied by the partition wall, inspection holes, chimneys, stacks and pipes is not deducted, but the area occupied by the above holes, independent columns, lamp troughs and curtain boxes connected to the ceiling should be deducted.
-
Anonymous users2024-01-20The calculation rules of the general ceiling are as follows: all kinds of ceilings are calculated according to the clearance area between the main walls, and the area occupied by the walls, inspection holes, chimneys, columns, buttresses and pipes is not deducted, and the area occupied by the walls, inspection holes, chimneys, buttresses and pipes is not deducted, but the area occupied by the above holes, independent columns, lamp troughs and curtain boxes connected to the ceiling should be deducted as gypsum board ceilings, and a light hole is dug in the middle, in fact, it is to increase the workload of workers, and it will only be charged more, not less. Guiyang florist.
-
Anonymous users2024-01-19If you don't deduct it, it will be according to the area of your ceiling room.
It's like a gypsum board ceiling.
Digging a light hole in the middle, in fact, increasing the workload of workers will only be more stupid.
1. About the enclosed balcony. The so-called closed balcony is a balcony with glass or plastic steel windows. However, it must be a closed balcony with planning approval documents or construction drawings approved by the planning department to be fully counted. >>>More
It is recommended to use aluminum gusset of aluminum profile, the degree of oxidation of plastic gusset is more serious than that of aluminum, and it will become extremely brittle after a long time. The plastic gusset is not resistant to high temperature, and the ceiling is in high temperature weather, which generates a lot of heat, which shortens the service life of the plastic gusset.
The width of the ceiling is generally 30 60cm is more appropriate, depending on the preference; From the perspective of floor height, the height of the ceiling can reach 20cm, not too high, otherwise it will affect the floor height and make people feel depressed.
[Which is better, light strip or spotlight] two properties. >>>More
The biggest feature is to maintain the overall unity and perfection of architectural decoration, and its development has developed from the general light source to the current popular LED light source, each with its own merits. >>>More