-
Anonymous users2024-01-23The question of whether it is better to use 80 PV pipe or shifter for toilet displacement depends on the specific situation, generally using a shifter can only move a small distance, while using 80 PV pipe can move a relatively large distance, depending on the specific use.
-
Anonymous users2024-01-22It is better to use a shifter for toilet shifting.
The size of the toilet shifter is generally 10cm 20cm
The toilet shifter is generally used in the following situations, and the pit distance in the bathroom (referring to the vertical distance from the center of the sewage pipe to the wall) is non-standard (the standard is 300mm or 400mm), then the shift is needed to move. >>>More
Toilet shifter: also known as offset, drain shifter;It is mainly used for toilet installation, because the position of the toilet wall and the sewage outlet is fixed, and the selected toilet sewage outlet and the lower sewage outlet do not correspond to the position of the pipe fittings used in the case of incomplete docking. >>>More
Originally, the shifter is a troublesome problem, and there are often problems with poor drainage, so it is recommended to consider resetting. If it really has to be moved, it can only be opened, unobstructed, and if the economy allows, change to a toilet with a large punch.
The toilet shifter is usually installed by lowering the plane of the original sewer pipe to make up for the installation height of the shifter (about 6 cm), so that the toilet is still installed at the height of the ground, if it is higher than the ground, it is usually used to make the plane with the height of the shifter, and then install the toilet at the height of the bottom of the toilet and its squatting range.
It is better to change the sewage pipe to this method, and the specific reasons are as follows: >>>More