-
Anonymous users2024-01-23The glass glue will definitely leak when it is softened by heat, clean the surface, air dry it with a hair dryer, and directly adjust the joint between the plastic pipe and the iron pipe with the dry hanging glue, and it will not leak again when it is dry.
1. Small problems are easy to solve, use plastic steel clay, A and B components are mixed and smeared, and it will be extremely hard after curing, such as the trachoma in the sink drainage. >>>More
It is very likely that the thread button is broken, you can take a picture yourself and buy it in the store, or you can find a plumber and help deal with it!
1. Redo waterproofing.
Redoing waterproofing means re-laying the floor tiles, removing the original tiles and cleaning the base surface. After the cement mortar is proportioned, the ground is leveled and further waterproofed. The height of the waterproof wall is controlled at about 30cm, which is the main waterproof method. >>>More
There is no pressure in the sewer pipe, so how to break it is not bad, you can fix it first, and then seal the crack with glass glue, etc., but this method is the best way, and it is best to replace it with a new one.
The ash pipe itself is PVC, and it must be glued with PVC glue, which must have been installed before without glue. >>>More