Decorate the kitchen and bathroom tile interface at the edging Which is better?

1. It is easy to open the mouth at the corner of the tile, either use caulk or white cement, if it is a colored porcelain piece with a little red, yellow pigment powder, try to make the color close to the point, and there is to play glass glue. 2. You can also spell the corner, but the workers need to spend more time when fighting, each brick should be ground into a 45-degree hypotenuse, and the materials and accessories should be selected if you really want to wrap the edge.

Regular or edging looks good.

The overall effect is also good.

Just pay attention.

Bricklayers need patience when cutting 45-degree angles.

Maintain the thickness of the edges in millimeters.

Do not stretch the porcelain. After the edge is polished, the thickness should be consistent, and the cement shrinkage should be reserved during construction.

This requires a worker with many years of experience to complete, if there is no such worker.

Then choose stainless steel painting angle line, it is simple, and the general worker can do it well, but the disadvantage is that it has taken a long time.

The corners appear to be paint-off.

Scratches fade. and other phenomena.

FYI.

The 45-degree angle is beautiful and beautiful, but things are fragile when touched.

If you don't touch the corners, you will miss a small piece when you touch them.

If you live by yourself, let's hit the corner.

It must be better to bump into the corners. The corners are neat and uniform, leaving no trouble, but the requirements for the master's craftsmanship are high, time-consuming, and the master with poor craftsmanship may do it unevenly. The edging is simple, just choose the main materials and auxiliary materials, but there are cracks in the later stage, and the dirt at the hemming joints is not easy to clean up the hidden dangers.

Now the construction of wall tiles is all to use the plastic corner to deal with the problem of the wall corner, the practice of touching the corner is labor-intensive and labor-saving, and this method has been rarely used.

Regular or edging to touch the white angle is good-looking. The overall effect is good, but it is noted that the bricklayer needs to be patient to keep the edge when cutting a 45-degree angle.

Back to millimeter thickness do not stretch.

Answer: porcelain edge polishing to be consistent in thickness, construction to reserve the amount of cement shrinkage This requires many years of experience workers to complete, if there is no such worker, then choose stainless steel painting angle line simple, the general worker can do a good job, the disadvantage is that the corner line appears after a long time, paint peeling, scratches, fading and other phenomena. FYI.

1. It is easy to open the mouth of the tile at the corner copy, either with caulk, bai or white cement, if it is a porcelain piece with du color, add a little red, yellow pigment powder, try to make the color close to the point, and there is to play glass glue. 2. You can also spell the corner, but the workers need to spend more time when fighting, each brick should be ground into a 45-degree hypotenuse, and the materials and accessories should be selected if you really want to wrap the edge.