-
Anonymous users2024-01-24Don't use CAD anymore, it's all professional software now.
Hole locations are automatically generated.
If you still have questions, you can send a private message or follow up.
It's not a question of whether it's good or not, the two-in-one is suitable for the connection of the 12 centi-plate, the three-in-one is suitable for the connection of the board above 15 centi, the force should be the strong point of the three-in-one, and the two-in-one is generally used for the connection of drawers and backplates!!
Like Chengfei Hardware, Andes, and Taifeng Hardware are all more professional in making three-in-one connectors for panel furniture in China, you can learn about them!
Lesfu, Andes, Unicom, etc., can all go to find out.
Three-in-one is divided into eccentric parts, screws, nuts, installation, first knock the nut (generally white) into the hole position of 10 or 8, and then the screw is twisted into the nut with an electric batch or cross knife, and finally the screw is stuck into the eccentric part, rotate the eccentric part, lock the screw, and assemble. The three-in-one is a link between the boards, so it is recommended to use raw materials for products produced with raw materials, and you can pay attention to the products of Luxf.
1. You should be familiar with the process size of the connector of the furniture; 2. You should be familiar with the structure of panel furniture; 3. You should be familiar with the processing characteristics of row drills; 4. You must know how to avoid deviations in the processing process.