-
Anonymous users2024-01-24Hello, it is recommended to use a universal meter to detect first, if it is indeed a line problem buried in the wall, replace it through the threading pipe, if it cannot be replaced, you can only take the bright line instead.
It should be that there is a leak in the embedded pipe. The damage of the embedded pipe is a crack. At that time, there was no pressure to give it when there was no bricking, and the leakage was light or not leaky, and with pressure, the cracks became larger and the amount of seepage increased!
Generally, 15mm and 20mm will be added.
Before pasting tiles, you need to check the verticality and flatness of the wall, if the verticality and flatness are not good enough, then you need to make adjustments in advance to keep the wall as smooth as possible. In this way, the thickness of the adhesive behind the tile can be uniform, which is good for reducing the amount of adhesive used and improving ergonomics. >>>More
I don't know whether the wire is installed in the open wire or dark wire, you can check the incoming line between the kitchen line and the air valve power switch, if it is a dark installation, there will be a junction box, there are only two possibilities, either the junction box, the connection between the power switch or the line that sits in due to the use of the electric water heater for a long time and ignition causes poor contact, as long as it is reconnected or replaced with a new one
Circle of friends door, why, as long as the water leaks. First of all, let's talk about how to waterproof. Do you want to find all the love? >>>More
Oh, I plan to lay parquet in the kitchen, and I learned that the joints of the kitchen wood floor can be treated with anti-leakage, and in fact, there is not much water on the kitchen floor. Just make a tile floor and connect with a wall tile at the wall joint.