-
Anonymous users2024-01-24Make a fuss about the floor purlins and pick the right thickness. Lay the floor at the level of the living room floor or slightly above the living room floor by 1 cm, and then press the edge with a metal strip (copper, aluminum alloy).
If you don't fill it, you can make a small staircase, or install a screen as a partition
Is the bathroom too high or too low?
What kind of flooring do you use in your home? If the bathroom is too high, your home is using an ordinary solid wood floor can be leveled by keel laying, if it is a laminate floor, you can level the ground, but this cost is a bit high, or you can lay a bedding treasure, but it should not be too thick, so as not to produce noise in the future. If the bathroom is too low, you can only try not to lay the keel, but the general solid wood floor is not laid keel directly laying is easy to cause problems, now only Zhejiang Lingge wood industry Tiange floor can do this, and then is to use the transition strip, in the bathroom and the living room at the door to lay the slate as a transition is also a good choice. >>>More
It can be paved, just solve the problem of the height of the door. >>>More
The bedroom was re-leveled with cement mortar, down to a centimeter lower than the floor tiles in the living room. The floor is just as flat.
This does not necessarily, it depends on the actual specific house type. For example, a house with a small room of about 30-60 should either choose a fully equipped tile or a fully equipped wooden floor, because there are too many separations and it seems visually narrow. For large apartments, it depends on the specific design style, but the majority of large bedrooms are equipped with wooden floors, about 80%, which is much higher than the proportion of floor tiles, because the bedroom wooden floors are softer and have no cold feeling of tiles, but some emphasize the personality or the lack of funds of the searcher will also choose to paste tiles. >>>More