-
Anonymous users2024-01-24Close the BAI water inlet angle valve and stop the water inlet. Note: When the water inlet angle valve is still in the open state, do not remove the water filter screen, otherwise the water will spray out.
Remove the inlet filter.
After removing the filter screen, the water will be attached to the filter screen to rinse the garbage; Please clean up the general small garbage with a toothbrush and other objects; If you have a large amount of garbage, please remove it with a cotton swab or other material.
Install the inlet water filter, and tighten it with an installation tool after installing it back as it is, otherwise it will cause water leakage. Note: Please tighten the inlet water filter firmly, otherwise it may cause water leakage.
Open the inlet angle valve, please confirm whether there is water leakage at the inlet angle valve.
Note: Do not use detergent when cleaning the filter, wash it with tap water. Do not remove the strainer too hard, as this may deform or rupture it.
1. The short circuit of the water temperature sensor of the smart toilet lid and the excessive rise in temperature are short circuits and broken. >>>More
It should be broken, and it is generally reset to its original position. However, it is also possible to move from the fixed point of washing the private parts to the fixed point of washing the buttocks. So it looks like the reset is incomplete, but it is actually moved to the corresponding position of the second function. >>>More
It may be that it has been in disrepair for a long time, or he has a temporary problem, you can debug it again, or the water in your house is out of water, and the smart toilet should be more anxious, and the water inlet and outlet should be very fast and convenient.
The button of the double row of the toilet tank cannot be reset after pressing, and it can be reset only if the water is turned off and the water is dry. >>>More
Because it is made by man, and it is not done well by man, what can it do? What's at fault? (brain teaser).