To what extent the bathroom is re tiled and the old wall is treated

Bathroom leakage is the first thing to determine where the water leaks. Generally, there are three kinds of water leakage: 1. The leakage of the waterproof layer is manifested as serious water leakage downstairs after bathing or ground water, and the downstairs performance may be one or more places.

The judgment method is very simple, plug the floor drain, and then release water on the ground, pay attention to the observation of the water leakage downstairs after 40 minutes, if the water leakage downstairs is serious, it is determined that the waterproof layer is leaking. In this case, you can find 100 million waterproofs on the Internet, and you can repair them by using 100 million waterproofing agents, caulking paste, and plastic steel mud. That is, the surface of the bathroom is waterproofed again, without planing tiles, saving time and cost.

2. The sewer pipe is leaking, which is manifested around the sewer pipe, and there is a serious dripping phenomenon. The way to judge is to drain the floor, the hand basin, fill the water, and repeatedly flush the toilet, and see the aggravation of the water leakage downstairs, it is the leakage of the sewer pipe. In this case, find a repairer to replace the sewer pipe and try to reduce the bricks as much as possible.

Then it also needs to be waterproofed under the ground rework, and there is no need to plane all the bricks. Yijia waterproof products can be used to waterproof the surface of the bathroom. 3. That is, the water inlet pipe leaks, if the water leakage is uniform and continuous, turn off the upper water, and the water will be reduced and will not leak.

It means that the water pipe is broken. This situation can be solved by changing the open pipe, without planing the bricks, or judging the leakage point by pressing and changing the pipe. Your situation is basically a leakage of the waterproof layer, which can be solved with 100 million waterproof products.

Go to Taobao to find 100 million waterproof bathroom leakage, first of all, judge the specific maintenance method of 100 million waterproof bathroom tile surface leakage: 1. Deal with the dust, oil, and water on the surface, and keep the surface dry; 2. If the tile joint is filled with caulk, you need to draw a small groove with a knife 3. In all cement parts such as tile surfaces, tile joints, wall joints, pipe roots, etc., spray and infiltrate Yijia permeable waterproofing agent, and be sure to spray evenly; 4. After the waterproofing agent 9 is dry (about 2 hours later), fill all tile joints, pipe roots and damaged and defective parts with Yijia caulking paste, and reinforce the weak links such as around the pipe root with caulking paste; 5. The connection between the ground and the wall is made of Yijia plastic steel mud as a waterproof edge. 6. After the waterproof construction is completed, the construction site cannot be drenched with water within 24 hours.