How to choose solid wood furniture? How to distinguish good and bad solid wood furniture? Can anyone

Parker Brothers Solid Wood Furniture reminds you: when choosing solid wood furniture, you must first understand whether it is pure solid wood, whether it is pure solid wood or veneer, these must be clearly written into the receipt for you by the store, which is the guarantee of after-sales in the future.

The price of solid wood furniture is generally more expensive, and it is necessary to be more careful when choosing, and the main methods are:

Take a look at the material.

The first thing to do is to make sure that the wood is exactly what it says.

Looking at the furniture of general good quality, after opening the cabinet doors and drawers, the wood is dry and white, the texture is clear and clear, and the texture is tight and delicate. And those furniture made from inferior materials will not be able to achieve this level. At the same time, good furniture requires that after opening the cabinet door or drawer, there should be no pungent odor.

Look at the components. Check the stressed parts of the furniture (sofa legs, columns, load-bearing bars close to the ground between connecting columns, etc.) to make sure there are no major knots, cracks, or cracks. Review the sliding and positioning of drawers, and open all doors and drawers to make sure they are properly installed and in use. Special attention should be paid to the joints of heavy furniture components, which should be fastened with screw caps.

Check all the components of the furniture that are made of wood-based panels, make sure that they have been edgebanded, and ensure that all kinds of accessories are installed with a lot of parts, no missing nails, and no nails are transparent.

Look at the place of origin because the moisture content of furniture wood is affected by its place of origin, and the moisture content is higher than the average moisture content of the use area of 1 more than 1 furniture will crack, deformation, scattering, warping and other phenomena, so it is best to buy furniture produced by enterprises with good drying technology, local or foreign production is not important, the key is that its moisture content should be consistent with the average moisture content of the use area.

Second, touch the surface.

See if the polished surface is smooth and if there are any protrusions that can hook through the clothes.

Touch the feet of the table to see if the feet and other parts are rough, and see if the paint in the corners is too thick.

The three pressures gently press the various stress points of the furniture, such as the column corners, drawers or shelf supports, etc., to test whether they are stable. Pressing the surface of the furniture hard can not have the feeling of emptiness and unreality, and the panel trembles.

Solid wood furniture is divided into pure solid wood furniture and imitation solid wood furniture.

The so-called imitation of solid wood furniture, from the appearance of solid wood furniture, the natural texture, feel and color of the wood are exactly the same as solid wood furniture, but in fact solid wood and imitation solid wood furniture wood-based panel mixed furniture, that is, the side board top, bottom, shelves and other parts with thin wood veneer particleboard or MDF fiberboard. Doors and drawers are made of solid wood. This process saves wood and also reduces costs.

The price of a set of imitation solid wood bedroom furniture should be about a few thousand yuan, while the price of all solid wood furniture should be at least 10,000 yuan; On the market, there are many imitations of the real and inflated asking price, when buying, it should be noted that in the domestic furniture market, many businesses advertise solid wood furniture refers to the frame of solid wood furniture, such as countertops, side panels, partitions, bottom plates, etc., may be wood-based panels.

If you want to discern it, let me make a few points for your reference.

The first type is the most common, that is, a layer of solid wood veneer is pasted on the surface of the furniture, which is very similar to pure solid wood furniture from the surface. With careful observation, it is easy to identify.

The second type of practice is to use the finger jointing board made of small pieces of solid wood spliced by deep processing as the base material of pure solid wood furniture, and then veneer the solid wood on the surface, which is also veneer, and carefully look at whether there are seams on the surface of the furniture, which is also easy to identify.

The third category is the most recently sophisticated and almost undetectable counterfeiting practices on the market. This kind of furniture processing trick is that the front and back of the wood is a thin finger joint board, and the center of the board is a variety of plywood and even a variety of waste wood, it is recommended that when buying, you can carefully check the nail holes, handles and other hardware holes to see if there is a mezzanine!

One of the mysteries of judging whether it is solid wood furniture is: wood grain and scarring, mainly looking at the door panels and side panels. Scarring:

Look at the location of the scarred side, and then look for the corresponding pattern on the other side. Wood grain: The appearance seems to be a pattern, so according to the position of the pattern change, look at the corresponding pattern on the back of the cabinet door, if it corresponds well, it is pure solid wood.

Cross-section: The color of the cross-section is darker than the panel, and it can be seen that it is made of a single piece of wood.

A simple way to tell if it is solid wood: mainly look at the wood grain and scars, and mainly look at the door panels and side panels. Scarring:

Look at the location of the scarred side, and then look for the corresponding pattern on the other side. Wood grain: The appearance seems to be a pattern, so according to the position of the pattern change, look at the corresponding pattern on the back of the cabinet door, if it corresponds well, it is pure solid wood.

Cross-section: The color of the cross-section is darker than the panel, and it can be seen that it is made of a single piece of wood. Open the doors and drawers of the furniture cabinet to observe whether the wood is dry and white, and whether the texture is tight and delicate.

If you have furniture made of materials such as particleboard, MDF and one-time molded board, open the cabinet doors or drawers and smell them for pungent odors.