What should I pay attention to in the acceptance of the ceiling?

Haha, the top is hung before you go to the acceptance, which is just to see the superficial things, just like a high-rise building rising from the ground, only when the foundation is solid can it be as stable as Mount Tai. Ceiling is not, only your base keel is solid and firm, and then your gypsum board surface can be done flat, firm and not deformed, you go to see, gypsum board surface cracking, deformation and painters have little to do with it, are the carpentry grassroots to cause trouble, which is called laymen to see the lively, insiders to see the doorway.

1. The ceiling should be clean and tidy, and the surface of the gypsum board should be smooth, with no color difference, no stains, no lack of edges and corners and obvious scratches from the overall point of view.

2. The gap of gypsum board should be suitable and installed on the same keel, and the middle of the adjacent gypsum board should be kept at a distance of about 3 mm. If there is a gap in the transverse part of the gypsum board, it is necessary to take measures to install the staggered joints to ensure the overall aesthetics of the gypsum board; When installing the gypsum board on both sides of the keel and the gypsum board on the same side of the keel, the joints should be staggered, if the seams are on the same keel, it will affect the overall aesthetics.