-
Anonymous users2024-01-24The overall kitchen countertop width is generally 500mm. The width of the countertop is determined according to the width of the sink, under normal circumstances, the reasonable width of the sink is about 450mm, and the width of the cabinet should be increased by about 100mm on the width of the sink, so the width of the cabinet is generally about 500mm.
If you want to deviate from the axis of the taper, the deviation can not be large, the length of the workpiece is different, the length of the workpiece can be large, the short point can be small, except for the degree of a few degrees The accuracy is not high, you can use this method, and the general taper processing should not be used. Mainly for the long axis degree of small small carriage travel stroke is not enough, and there is no large carriage walking and small carriage walking at the same time device of the turning mechanism, deviation lathe has a scale, the amount of deviation of processing, according to the length of the workpiece, the size of the degree is decided, the excessive chuck clamp and the top damage is large,
The kitchen countertop is generally about 820mm, and you can also increase or decrease the height according to your height. It can also be designed with 2 heights, a lower height on the gas stove side and a higher height on the sink side.
The standard height is usually 80 cm, but it also needs to be based on the height of the family, if there are elderly people and children, it is a little lower, 75 cm. The minimum should not be lower than 65 cm, or 85 cm if the family is generally high by members. >>>More
If the kitchen space allows, the length is about 3 meters (the width is generally in meters). Among them, the length of the double-sink sink is about one meter, the length of the double-mouth stove is about one meter, and the cutting board and items are about one meter, which is basically enough and will not be crowded.
The standard table height is 80 cm.
Generally, when regular cabinet manufacturers make cabinets, they must be with water retention, and the role of water retaining is the same as the baseboard of the ground, which plays the role of closing, beauty and preventing water stains from polluting the wall. If there is no water retention, the place where the cabinet and the wall interface must be sealed with glass glue to avoid water leakage and damage to the cabinet. >>>More