The floor heating at home is not hot, what is going on with the back basket of the bathroom is hot T

Updated on Bathroom 2024-10-05
7 answers
  1. Anonymous users2024-01-24

    Want to be sure, is your neighborhood all geothermal?

    If yes, there are several possibilities:

    1. The other 4 pipes are connected by hot melt joints, and a fuse is generated during the welding, resulting in poor circulation of the floor heating pipe and excessive water resistance. In this case, you can turn off the water circulation in the bathroom, and touch the temperature difference between the inlet pipe and the outlet pipe in the morning after a day, if the temperature difference is large, it means that the floor heating pipe is still open, and you can close the bathroom after continuing to use other pipes.

    2. When installing floor heating, the floor heating pipe of the bathroom is too short compared with the floor heating of other rooms, and the resistance gap is too large.

    3. This is very scary, that is, the other pipes are all blocked, and the method is the same as the first one, that is, when you touch it, there is no temperature difference between the inlet pipe and the outlet pipe.

  2. Anonymous users2024-01-23

    1.The inside of the unhot water pipe is clogged.

    2.In the heat source (furnace) is not forced, the selection is small, and now it is a small cycle, and only a part of the pipeline is taken.

    3.You can try to put the other hot pipes on the water separator and turn off the valves, and then see if the pipes that were not hot are now hot. This proves if there is a problem with the tubing.

    4.If the pipe is hot according to 3, then you close the other pipeline valves 1 3, do not open them all, and heat the heat evenly.

    The above are all references, I hope it can help you. There are good floor heating brands such as Sanfu floor heating, as well as Vaillant, you can go to the China floor heating network under the warm nest to see, which introduces a lot of WGE

  3. Anonymous users2024-01-22

    1.What floor are you? The first floor may be underneath the floor heating pipes and the insulation is not done well.

    2.In addition, if your back basket and floor heating are introduced by one pipe, the back basket pipe may be too large and the diversion is too large.

    3.The most likely reason is that your home's introductory PPR pipe is overloaded during the hot melt connection, resulting in a smaller inner diameter and ultimately a decrease in the total flow rate. Or it is the hot melt of the subdivision of the water separator, the inner diameter becomes smaller, and the flow rate decreases.

  4. Anonymous users2024-01-21

    The floor heating company you are looking for to clean the floor heating is too unprofessional, the floor heating pipe above is heated because the upper one is the water intake, the lower one is the return water, and the floor heating is not circulating, so the lower one is not hot. The reason why floor heating does not circulate is that the resistance of floor heating is large, and there are hundreds of meters of pipe under the floor heating. And the back basket in the bathroom is not much resistance, so the water is back from the back basket, you first turn off the back basket in the bathroom, and you are trying.

  5. Anonymous users2024-01-20

    Then you can try electric heating.

    1. Ground heating, low one-time investment;

    2. The service life is more than 50 years and the same life as the building, and there is no maintenance and maintenance;

    3. The operating cost is the most economical, saving 1 3 heating costs compared with central heating;

    4. Parallel heating resistance, quadruple safe operation protection, temperature room and household adjustable heating;

    5. The principle of healthy far-infrared heating, the product has been identified by the national professional far-infrared organization as the "light of life" that emits microns.

    6. It is convenient to pave, which is more than 3 times the paving speed of other heating facilities.

    7. Warranty period: 10 years.

    Advantages of our products:

    1. The base material of the product is PET material, and the surface is covered with temperature-resistant PVC, waterproof, compression-resistant, wear-resistant, acid-alkali resistant;

    2. The technical indicators are at the international leading level, and South Korea has a 20-year history of use.

    3. Passed the ISO9001 international quality system certification; ISO14001 international environmental system certification;

    4. China Pacific Insurance Company "Quality Underwriting".

    Liaocheng Yishengyuan Technology welcomes you!!

  6. Anonymous users2024-01-19

    After 2 years, was it hot last year? Is there a problem with the boiler room of the community property? Or is it that the boiler is not burned well? Do you have your own small boiler for underfloor heating? Or is it burned in a large communal boiler?

  7. Anonymous users2024-01-18

    The problem of the water separator, I don't know much about plumbing.

Related questions
4 answers2024-10-05

1. The circulation of floor heating pipes is not smooth, and the water resistance generated is too large. In this case, you can turn off the water circulation in the bathroom, and touch the temperature difference between the water inlet pipe and the water outlet pipe in the morning after a day, if the temperature difference is large, it means that the floor heating pipe is still open, you can close the bathroom and continue to use other pipes. >>>More

6 answers2024-10-05

Hello, Yu Qing.

If the floor heating living room is not hot, and the bedroom is hot, it means that the water separator of the floor heating pipe may be blocked, indicating that there is a search air blockage on this side of the living room, or the vertical leakage is blocked by other objects, and we need to dredge the exhaust. >>>More

3 answers2024-10-05

The bathroom is not equipped with a back basket, and if the floor heating pipe is not formed into a circuit, the floor heating will not be hot, and if the floor heating pipe has been connected to form a circuit, it will be hot.

3 answers2024-10-05

1. The circulation of floor heating pipes is not smooth, and the water resistance generated is too large. In this case, you can turn off the water circulation in the bathroom, and touch the temperature difference between the water inlet pipe and the water outlet pipe in the morning after a day, if the temperature difference is large, it means that the floor heating pipe is still open, you can close the bathroom and continue to use other pipes. >>>More

6 answers2024-10-05

It can be changed, but be careful not to break the waterproofing of the bathroom.