What do you do with the small holes on both sides of the siphon toilet drain?

Updated on Toilet 2024-10-06
3 answers
  1. Anonymous users2024-01-24

    Siphon toilets.

    The small holes on both sides of the drain are used for drainage, which means that when you flush the toilet, water will come out of the small hole in the toilet by pressing the flush button, and the dirt in the toilet will be thoroughly cleaned.

  2. Anonymous users2024-01-23

    The flush outlet with better sewage discharge effect, as well as three and five outlets, increase the flush point, rotate the flow down, and the sewage discharge effect is good.

  3. Anonymous users2024-01-22

    The small holes on both sides of the siphon toilet drain should be used to secure the base.

Related questions
1 answers2024-10-06

The small holes on both sides of the siphon toilet drain are used for installing expansion screws when installing toilets, and now many masters do not play expansion screws when installing, and these two small holes should be blocked, otherwise there may be odor leakage when using.

1 answers2024-10-06

The relationship between the drainage working mode of the toilet and the distance between the reserved hole of the sewage pipe, if the pipe mouth is reserved, 38cm can be reserved generally, and the toilet of any brand can be installed if you buy it, as long as the drainage outlet is the same, there is no problem.

1 answers2024-10-06

Yes, as long as it is fixed and does not leak, you should be talking about U-PVC pipes, right?

1 answers2024-10-06

If there is a certain amount of extension space under the flange ring of the toilet, as long as it is not more than three centimeters, there is generally no problem. But if it is more than three centimeters, you have to think of a way, it is best to use a pipe that is one size smaller than the toilet drain pipe as an extension pipe, and stick it tightly with PVC glue. >>>More

3 answers2024-10-06

This is when the reservoir drain valve is not back in place or damaged.