The bathroom bath bomb exhaust fan is broken, and there is no response when it is turned on, what is

The bathroom bath bomb exhaust fan is turned on and there is no response, there are several situations:

1. The exhaust fan itself is damaged.

2. The starting capacitor of the exhaust fan is damaged, you can power up the exhaust fan, and then dial the fan blades (be sure to pay attention to safety), if it turns up, the starting capacitor is damaged.

3. Power supply line problems, such as poor contact of wires, switch problems, etc.

What should I do if the bathroom bomb switch is broken?

1. This is a double-pole switch (also called a double-throw switch), that is, you can control a lamp with two switches.

2. Just replace it yourself, there are three binding posts in the bipolar switch, the upper and lower two wires are connected to another switch, and the middle one is the connected live wire.

3. Therefore, you must not mess up when you change, the middle one must be connected in the middle, and it doesn't matter if the other two are reversed.

4. The most important thing is to explain that when you buy a switch, it is a bipolar switch, don't buy an ordinary switch.

It may be that the bath bomb switch is broken, or the capacitor of the exhaust fan is broken, or the motor winding is broken, and it must be carefully inspected to find the problem.

After the power is off, the toggle fan blade is very flexible, and most of the motor capacitors have been damaged and need to be replaced.

Rarely, the motor is damaged.

Ok dear, question received, please wait.

There are several situations when the exhaust fan of the bathroom bomb is turned on and there are several situations: 1. The exhaust fan itself is damaged, and this needs to be replaced with a new one; 2. If the starting capacitor of the exhaust fan is damaged, you can power up the exhaust fan, and then dial the fan blades, if it turns up, the starting capacitor is damaged; 3. Power line problems, such as poor contact of wires, or wires have fallen off, etc.

Thank you for your question! It's so polite, I hope it can help you

There may be a humming sound that is one, the rotation is not flexible, two, the starting capacitor is failing, and the third winding is broken. There is no buzzing sound, check whether the switch is in good contact, the line is not broken, and the motor winding is bad.